Keterangan
Steel Stock Sprocket – Double Strand Type — Professional Grade ANSI Sprocket
The Ever-power Steel Stock Sprocket – Double Strand Type is engineered to meet the rigorous demands of modern industrial power transmission. Built from AISI 1045 / C45 Carbon Steel, these sprockets cover chain sizes No.35, No.40, No.50, No.60, No.80, No.100, No.120 with pitch range 3/8″ to 1-1/2″. Available configurations include Type B (one hub) and Type C (two hubs). Every unit is CNC-machined to ANSI B29.1 tolerances and undergoes 100% dimensional inspection before shipping.
Technical Specifications
| Parameter | Spesifikasi |
|---|---|
| Chain Compatibility | No.35, No.40, No.50, No.60, No.80, No.100, No.120 |
| Pitch Range | 3/8″ to 1-1/2″ |
| Material | AISI 1045 / C45 Carbon Steel |
| Tooth Hardness | HRC 50–60 (≤25T induction hardened) |
| Surface Treatment | Black oxide; zinc plating optional |
| Configuration | Type B (one hub) and Type C (two hubs) |
| Standard | ANSI/ASME B29.1, ISO 606 |
| Bore Tolerance | H7 (finished bore) / Pilot bore (stock) |
Product Highlights
✔ High-Capacity Design
Engineered for maximum power transmission with optimised tooth geometry that ensures smooth chain engagement and minimal energy loss across the full speed range.
🛡 Extended Service Life
Premium steel construction combined with precision heat treatment delivers exceptional wear resistance, reducing replacement frequency and total cost of ownership.
⚙ Versatile Mounting
Multiple hub configurations and bore options ensure compatibility with a wide range of shaft sizes, bearing arrangements, and installation constraints.
🔧 Maintenance-Friendly
Designed for straightforward inspection, lubrication, and replacement, minimising the skills and tools required for routine maintenance operations.
Chain & Accessory Compatibility
This sprocket is compatible with all ANSI-standard roller chains of the corresponding series numbers listed above. Compatible accessories include standard taper bushings, QD bushings (where applicable), split taper bushings, shaft collars, and pillow-block or flange-mount bearings. Shaft bore ranges are determined by the chain number and hub configuration — refer to our detailed catalogue or contact engineering for specific bore availability.
Selection Guide
Select by Chain Number
Identify the chain series number stamped on your chain side plates. Match it to the sprocket series number for guaranteed compatibility. Use the same series for driver and driven sprockets.
Select by Application Demands
Light-duty conveyors and packaging: No.35–50. General industrial and agricultural drives: No.50–80. Heavy aggregate, mining, and steel processing: No.80–140. Extreme-load applications: No.140–200.
Select by Load Capacity
Calculate your design horsepower, apply the appropriate service factor (1.0 for uniform load, 1.3 for moderate shock, 1.5+ for heavy shock), then consult the ANSI horsepower rating tables for the minimum chain pitch and strand count that meets or exceeds your requirement.
Material & Manufacturing
| Milik | Detail |
|---|---|
| Bahan Dasar | AISI 1045 / C45 Carbon Steel |
| Carbon Content | 0.43–0.50% (1045 grade) |
| Kekuatan Tarik | ≥ 585 MPa (85 ksi) |
| Heat Treatment | Induction hardened teeth to HRC 50–60 (sprockets ≤25T) |
| Lapisan Permukaan | Black oxide; zinc plating optional |
| Manufaktur | CNC hobbing, precision boring, automated deburring |
Aplikasi Industri
Manufaktur
Production lines, automated systems
Mining & Aggregate
Crushers, screens, elevators
Pertanian
Harvesters, irrigation, grain handling
Logistik
Sortation, conveying, palletising
Customer Success Stories
★★★★★ Fortescue Metals — Perth, Australia
“Our double-strand 80 sprockets handle 200-tonne/hr ore throughput with minimal wear.”
★★★★☆ ThyssenKrupp — Essen, Germany
“Consistent batch quality is critical for our conveyor assemblies. Ever-power delivers.”
★★★★★ Glencore Mining — Kolwezi, DR Congo
“Harsh conditions, extreme dust. These duplex sprockets keep running shift after shift.”
★★★★★ Cargill Grain — Chicago, USA
“We spec double-strand for all our grain elevator drives. Reliability is non-negotiable.”
Pertanyaan yang Sering Diajukan
Why choose double-strand over a larger single-strand?
Double-strand distributes the load across two chain rows, reducing individual chain stress by approximately 50%, which extends both chain and sprocket life.
Are the two tooth rows aligned?
Yes, both rows are CNC-hobbed in a single setup to ensure precise inter-row alignment within 0.05 mm.
Can I run a single chain on one row?
This is not recommended. Running a single chain on a duplex sprocket causes uneven loading and accelerated wear.
What hub types are available?
Type B (hub on one side) and Type C (hubs on both sides) are standard configurations.
Do you supply duplex chains as well?
Yes, we offer matched ANSI duplex roller chains for all series from No.35-2 through No.120-2.
Recommended Companion Products
🔗 Matching Roller Chains
ANSI standard and heavy-duty roller chains perfectly paired with your sprocket selection. Browse chains
🔨 Shaft Bushings
Taper lock, QD, and split taper bushings for secure shaft mounting.
⚙ Bearings & Housings
Pillow-block, flange-mount, and take-up bearings for complete drive systems.
Installation Procedure
- Shaft Cleaning: Remove rust, grease, and old adhesive from the shaft surface using emery cloth and solvent.
- Bushing Preparation: Inspect the bushing bore and taper for damage. Apply a thin film of anti-seize compound to the taper surface.
- Assembly: Place the bushing into the sprocket hub, align the bolt holes, and finger-tighten the cap screws.
- Positioning: Slide the assembly onto the shaft to the desired axial position.
- Tightening: Torque cap screws evenly in a star pattern to the manufacturer’s specified value.
- Verification: Spin the shaft by hand and verify free rotation. Check alignment with a straight edge or laser.
Maintenance & Care
Perform visual inspection of tooth profiles weekly. Lubricate the chain with ISO VG 100 oil every 500 hours. Measure chain elongation monthly — replace at 3% stretch. If tooth flank wear exceeds 0.5 mm beyond the original profile template, replace the sprocket. Always replace chain and sprocket as a matched set.
Certifications & Quality Assurance
All products comply with ANSI/ASME B29.1, ISO 606, and DIN 8187/8188 standards. Our facility is ISO 9001:2015 certified, with ongoing compliance audits. Material certificates (EN 10204 3.1) and Certificates of Conformance are available for every order. We support customer-specific quality protocols including PPAP (Production Part Approval Process) for automotive OEMs and FDA-compliant material documentation for food-industry applications. Our quality commitment: if any sprocket fails to meet published specifications within its warranty period, we replace it free of charge.
Why Partner with Ever-power Australia Sprocket Co., Ltd.?
We have been manufacturing industrial sprockets for over two decades, exporting to more than 60 countries across six continents. Our vertically integrated production facility spans 30,000 m² and houses 120+ CNC hobbing centres, induction hardening lines, and a fully equipped metrology laboratory. We hold ISO 9001:2015 certification and maintain full material traceability from raw billet to finished product. Our engineering team provides free selection assistance, CAD models, and rapid prototyping for OEM customers. Whether your order is 100 pieces or 100,000, we deliver consistent quality on schedule — backed by a 12-month product warranty and dedicated after-sales support.
Siap untuk Mengupgrade Sistem Penggerak Anda?
Contact our specialist team today for competitive pricing, technical support, or to request samples. We are committed to helping you find the optimal sprocket solution for your application.
