Overview — Sprockets for Rock Crushers
Australia’s quarry and mining sectors process billions of tonnes of rock annually — from granite in the Adelaide Hills to basalt in Western Victoria and iron ore in the Pilbara. Rock crushers are the workhorses of this industry, and the chain-and-sprocket drives powering their feeder conveyors, discharge conveyors, and screen decks endure some of the most brutal operating conditions in any industrial application: extreme shock loads, abrasive dust measured in kilograms per cubic metre, and 24/7 operation in temperatures ranging from sub-zero to 50 °C+.
Ever-Power Australia Sprockets Co., Ltd. 生产 crusher-grade sprockets from 42CrMo4, manganese, and AR400 steels, through-hardened or carburised to HRC 58+, with optional tungsten-carbide overlay for the most extreme abrasion. Our sprockets are trusted on primary, secondary, and tertiary crushing circuits across Australia’s toughest sites.
技术规格
| 范围 | 标准 | 风俗 |
|---|---|---|
| 链节 | 1″ – 3″ (ANSI 80–240) | 最大 4 英寸 |
| 牙齿 | 9 – 40 | 最多72 |
| 斯特兰德 | 双工/三工 | 四边形/六边形 |
| 中心 | B型/C型/QD型/锥形 | 焊接式/分体式 |
| 钻孔 | 40 mm – 150 mm | 最大可达 300 毫米 |
| 材料 | 42CrMo4 / 40Cr | Manganese / Hadfield / AR400 |
| 硬度 | HRC 48–58 | HRC 62 渗碳 |
| 表面 | 热浸镀锌/达克罗 | Tungsten carbide overlay |
| PCD | 100毫米 – 1500毫米 | 最大可达 2500 毫米 |
| 轮廓 | ANSI B29.1 / ISO 606 | 重型改装 |
| 最高转速 | 400 | 600 (balanced) |
| 温度 | -30 °C 至 +200 °C | –50 °C to +300 °C |
| 键槽 | DIN 6885 | Double / spline |
| 孔径公差 | H7 | H6 |
| TIR | ≤ 0.10 毫米 | ≤ 0.05 毫米 |
| 工作负载 | 每股最大承重 80 kN | 150 kN+ |
| 拉伸 | ≥ 900 兆帕 | ≥ 1200 MPa |
| 疲劳 | ≥ 10,000 小时 | ≥ 25,000 小时 |
| Impact Toughness | ≥ 27 J @ –20 °C | ≥ 47 J @ –40 °C |
| 包装 | 重型木箱 | 定制托盘 + 认证包装 |
性能优势
⚡ Shock-Load Engineered
42CrMo4 alloy with ≥ 27 J Charpy impact toughness absorbs the sudden peak loads generated when oversized rocks enter the crusher. Budget sprockets crack; ours flex and endure.
💪 4× Abrasion Life
Carburised teeth (HRC 58) or optional tungsten-carbide overlay resist the grinding action of crushed rock dust that destroys standard C45 sprockets in weeks.
🔧 Split-Hub Maintenance
Replace sprockets without pulling the shaft from the crusher frame. Cuts change-out time from a full shift to 2–3 hours — critical in 24/7 quarry operations.
❌ Why Budget Fails
Untreated carbon-steel sprockets mushroom, crack, and shed teeth under crusher loads. A single unplanned crusher shutdown can cost AUD 30,000–80,000+ in lost production.
How Sprockets Work in Crusher Circuits
Rock-crushing circuits use chain-and-sprocket drives in several high-stress applications:
▸ Apron feeder below primary crusher: The largest sprockets (30–45 teeth, ANSI 160–240 triplex/quad) drive a heavy apron chain that feeds blasted rock from the ROM hopper into the jaw or gyratory crusher. Shock loads from dropping 500 kg+ boulders are extreme.
▸ Crusher discharge conveyor: Chain drives carry crushed material from the crusher to screens or stockpile. Abrasive dust concentration is highest at this point.
▸ Vibrating screen drive: Some screens use chain-and-sprocket exciter drives. The cyclical vibration accelerates fatigue on sprocket teeth and keyways.
▸ Recirculation/oversize return: Oversize material rejected by screens is conveyed back to the crusher via a chain-driven recirculation conveyor.
▸ Wash plant conveyor: For washed aggregates, sprockets must resist both abrasion and moisture/chemical corrosion.
兼容性
| Crusher Position | 链类型 | Equipment* |
|---|---|---|
| Primary Feeder | ANSI 160–240，锻造链节 | Metso, FLSmidth, Sandvik |
| Discharge Conveyor | ANSI 100–160 Duplex/Triplex | Terex, McCloskey, Powerscreen |
| Screen Drive | ANSI 80–120 | Haver & Boecker, Schenck, IFE |
| Wash Plant | ANSI 80–120 galvanised | CDE, McLanahan, Weir |
*此处仅列出品牌名称以作交叉引用，与品牌无任何关联。
📊 Crusher Type — Shock Load Factor & Sprocket Material Recommendation
| Crusher Type | Shock Factor | Feeder Sprocket | Discharge Sprocket |
|---|---|---|---|
| Jaw Crusher | 3.0–4.0× | 42CrMo4 渗碳 | 40Cr硬化 |
| Gyratory Crusher | 2.5–3.5× | Manganese steel | 42CrMo4 |
| Cone Crusher | 2.0–3.0× | 40Cr硬化 | C45 induction-hardened |
| Impact Crusher (HSI) | 3.5–5.0× | 42CrMo4 + WC overlay | 42CrMo4 渗碳 |
| VSI Crusher | 2.0–2.5× | 40Cr硬化 | C45 hardened |
选材指南
- Identify crusher type and position in the circuit (primary, secondary, tertiary).
- Determine chain size, strand count, and working load from the crusher/conveyor OEM manual.
- Calculate shock load factor (see table above) and apply to sprocket material selection.
- Measure shaft bore and hub arrangement; specify split hub if in-situ replacement is required.
- Assess site conditions: dust level, moisture, temperature, chemical exposure (e.g., acidic ore).
Talk to our quarry and mining engineers for site-specific crusher sprocket recommendations.
安装
- Lockout crusher and all associated conveyors per AS/NZS 4024 and site LOTO procedures.
- Use overhead crane or chain hoist to support chain before breaking.
- Remove old sprocket; hydraulic puller for press-fit hubs; unbolt for split hubs.
- Inspect shaft for scoring, corrosion, and fatigue cracks. NDT (MPI) recommended for critical drives.
- Heat-shrink fit or key new sprocket to shaft; torque to engineering specification.
- Laser-align drive and driven sprockets; ≤ 1 mm per 1 m for heavy crusher drives.
- Rejoin chain with new connecting link; set initial tension per OEM manual.
- Lubricate chain and sprocket with EP grease (NLGI 2) or automatic lubrication system.
- Run at creep speed under no load; verify chain tracking and listen for abnormal contact.
- Load test at 50%, 75%, 100% before returning crusher to full production.
故障排除
Sprocket tooth fracture
原因： Shock load from tramp metal or oversized boulder exceeding material toughness. 使固定： Upgrade to 42CrMo4 with ≥ 47 J impact toughness; install tramp-metal detection upstream.
Rapid tooth abrasion
原因： Fine rock dust packing into chain joints and grinding teeth. 使固定： Upgrade to carburised or WC-overlay sprocket; install water spray dust suppression.
Hub keyway wallowing
原因： Cyclic shock loosening the key fit over time. 使固定： Machine oversize keyway and fit larger key; or upgrade to spline-bore sprocket.
Chain climbing over sprocket
原因： 链条伸长 > 3% 并伴有齿轮磨损。 使固定： Replace chain and sprocket simultaneously. Never mix new and worn.
Corrosion on wash-plant sprockets
原因： Acidic or high-chloride wash water attacking carbon steel. 使固定： Switch to hot-dip galvanised or SS 316 sprockets for wash-plant applications.
案例研究
📍 Boral Quarry, Peppertree, NSW
Primary jaw crusher apron feeder, ANSI 200 triplex, 800 t/hr basalt. Standard sprockets lasting 4 months.
结果： 42CrMo4 carburised 25T triplex with split hub. Service life extended to 15 months. AUD 95,000/yr saved in parts and downtime.
“Fifteen months from one sprocket on our primary — that’s a record for this quarry.” — Quarry Manager
📍 BHP Olympic Dam, SA — Underground Crusher
Gyratory crusher feeder, ANSI 240, extreme dust and temperature cycling. Sprocket tooth cracking from thermal shock.
结果： Manganese-steel sprockets with controlled cooling protocol. Zero tooth fractures over 18 months.
“Manganese steel was the right call. It handles the thermal cycling our underground environment throws at it.” — Maintenance Superintendent
📍 Hanson Quarry, Lysterfield, VIC
Secondary cone crusher discharge, ANSI 120 duplex. Abrasive granite dust destroying sprockets every 8 weeks.
结果： Tungsten-carbide overlay sprockets. First replacement at 11 months — 6× life improvement.
“WC overlay is expensive upfront but pays for itself three times over in reduced downtime.” — Plant Supervisor
📍 Holcim Quarry, Rooty Hill, NSW
Impact crusher (HSI) feeder, extreme shock factor 4.5×. Sprocket hub cracking after 6 months.
结果： 42CrMo4 sprocket with spline bore (no keyway stress riser). 14 months service, zero hub cracks.
“Eliminating the keyway eliminated the crack initiation point. Simple engineering, brilliant result.” — Mechanical Engineer
📍 Adelaide Brighton Cement, Angaston, SA
Limestone wash-plant conveyor. High-chloride bore water corroding carbon-steel sprockets in 10 weeks.
结果： Hot-dip galvanised sprockets with matched galvanised chain. 12 months service, minimal corrosion.
“Our bore water is brutal. Galvanised sprockets finally give us a full season.” — Wash Plant Operator
常见问题解答
Do you supply sprockets for mobile crushers?
Yes. We supply replacement sprockets for Metso Lokotrack, Sandvik QJ/QH, Terex Finlay, and McCloskey mobile crushing plants.
Can you manufacture sprockets above 100 kg?
Yes. Our heavy-duty facility produces sprockets up to 200 kg for primary crusher apron feeders.
What is the advantage of split-hub sprockets?
Split hubs allow in-situ sprocket replacement without pulling the shaft. Typical time saving: 6–10 hours per change-out on large crushers.
Do you supply to quarry EPCM contractors?
Yes. We work with major EPCM and quarry plant builders for greenfield and upgrade projects.
Can you match an OEM Metso or Sandvik sprocket?
Yes. Provide the OEM part number or drawing and we manufacture to exact specification.
What testing do crusher sprockets receive?
Hardness (Rockwell), impact toughness (Charpy), MPI/UT for defects, and CMM dimensional verification. Reports included.
Do you offer emergency supply for crusher breakdowns?
Yes. Priority manufacturing and express freight for unplanned crusher shutdowns. Contact us 24/7.
What surface treatment resists acidic ore dust?
Ceramic coating, hot-dip galvanising, or Dacromet for pH < 4 environments.
Can I get sprockets on consignment at the quarry?
VMI and consignment arrangements available under annual supply agreements.
How does your pricing compare to OEM crusher spare parts?
工厂直销价格通常比 OEM 价格低 30–50%。 索取报价 for your crusher model.
相关产品——重型链条
搭配我们的 heavy-duty roller chains and engineering-class chains for complete crusher drive solutions.
认证
✅ ISO 9001:2015 | ✅ ANSI B29.1 / ISO 606 | ✅ AS 1755 (Conveyors) | ✅ EN 10204 3.1 | ✅ RoHS | ✅ CE
为什么选择 Ever-Power Australia Sprockets Co., Ltd.？
和 20多年重型链轮制造经验, we serve quarries, mines, cement plants, and crushing contractors across Australia and 50+ countries. Our 25,000 m² factory handles everything from precision micro-sprockets to 200 kg crusher monsters. Australian warehouse stock, emergency response capability, and full engineering support — because crushers can’t wait.
Crush More Rock — Contact Us
Built for the hardest rock in Australia.
Ever-Power Australia Sprockets Co., Ltd. supplies crusher-grade sprockets that outlast the competition in the most demanding quarry and mining environments. Contact our engineering team for site-specific recommendations.
