Overview — Sprockets for Paper & Fabric Finishing Equipment
The final stage of paper and fabric production — finishing — is where raw material becomes a premium product. In Australian paper mills from the Latrobe Valley to Tumut, and in textile finishing plants across Melbourne and Sydney, calenders, coaters, dryer cans, stenter frames, and rewinders apply the surface quality, dimensional precision, and aesthetic finish that end customers demand.
Every one of these machines relies on chain-and-sprocket drives to synchronise rollers, transport webs, and control tension. Even minor sprocket imperfections create speed variation that translates into coating streaks, calender barring, fabric skew, or web breaks — turning premium product into downgraded waste.
Ever-Power Australia Sprockets Co., Ltd.에서 제조합니다. finishing-grade sprockets with ultra-precision tooth profiles (TIR ≤ 0.015 mm), G2.5 dynamic balancing, and corrosion-resistant materials engineered for the humid, chemical-laden environments of paper and textile finishing. Our sprockets keep your finishing line running smoothly, producing first-grade product with minimal waste.
기술 사양
| 매개변수 | 기준 | 관습 |
|---|---|---|
| 체인 피치 | 3/8″ – 1″ (ANSI 35–80) | 최대 1-1/4인치 |
| 이 | 9 – 45 | 최대 72개 |
| 바닷가 | 심플렉스/듀플렉스 | 삼박자 |
| 바퀴통 | A형 / B형 / QD형 / 테이퍼형 | Flanged / Weld-on |
| 구경 | 10 mm – 65 mm | 최대 100mm |
| 재료 | C45 / 40Cr / SS 304 | SS 316 / 42CrMo4 |
| 경도 | HRC 38–48 | HRC 55 침탄 |
| 표면 | Zinc / Black Oxide / Chrome | Nickel / Dacromet / Electropolished |
| PCD | 30 mm – 500 mm | Up to 800 mm |
| 윤곽 | ANSI B29.1 / ISO 606 | 정밀하게 수정됨 |
| 최대 RPM | 1,800 | 3,000 |
| 임시 | -20°C ~ +120°C | –40 °C to +200 °C (dryer section) |
| 키웨이 | DIN 6885 | 스플라인/D-보어 |
| 보어 공차 | H7 | H6 |
| 티르 | ≤ 0.04 mm | ≤ 0.015 mm |
| 동적 균형 | 기준 | G2.5 밸런스 |
| 인장력 | ≥ 620 MPa | 900 MPa 이상 |
| 피로 | 12,000시간 이상 | 28,000시간 이상 |
| 내습성 | Zinc 200 hr | SS / Dacromet 1000+ hr |
| 포장 | Anti-rust poly bag | 클린룸/맞춤형 상자 |
성능상의 이점
Zero Calender Barring
TIR ≤ 0.015 mm eliminates the periodic speed variation that creates visible barring patterns on calendered paper and coated fabric.
Dryer-Section Rated
SS 316 and high-temp alloy sprockets withstand the 120–200 °C steam-heated dryer environment without warping or corrosion from condensate.
Web Tension Control
Precision sprockets maintain ±0.1% speed consistency across nip rollers and draw sections — essential for uniform coating weight and fabric stretch control.
열등한 대안: Standard-tolerance sprockets introduce 0.2–0.5% speed pulsation per revolution. On a calender operating at 500 m/min, that creates visible barring every 150–200 mm — downgrading premium paper to industrial grade. On stenter frames, it causes fabric width variation and edge-curl defects.
How Sprockets Work in Finishing Equipment
▸ Paper calender / supercalender: Multiple nip-roller stacks smooth and densify paper. Each roller is driven through chain-and-sprocket sets that must maintain exact speed matching — even 0.05% speed difference between nip rollers creates barring.
▸ Paper coater: Sprockets drive applicator rollers and metering rods that apply coating (clay, latex, starch) to the paper web. Speed consistency determines coating weight uniformity and streak-free quality.
▸ Dryer section: Steam-heated dryer cans are driven through sprocket-and-gear trains. Sprockets operate in high-humidity, 120–180 °C environments with condensate exposure.
▸ Stenter / tenter frame (textiles): A sprocket-driven chain carries fabric through a heated oven while stretching it to specified width and controlling shrinkage. Chain-and-sprocket precision determines finished fabric width tolerance.
▸ Rewinder / sheeter: Sprockets synchronise the web speed between unwind and rewind stations, or drive the cross-cut knife in sheeters. Speed precision prevents telescoping and curl.
호환성
| 장비 | 체인 유형 | OEM* |
|---|---|---|
| Paper Calender | ANSI 50–80, Timing chain | Valmet, Voith, Andritz |
| Paper Coater | ANSI 40–60 | Valmet, BTG, Jagenberg |
| Dryer Section | ANSI 60–100 SS | Valmet, Voith, Kadant |
| Stenter Frame | ANSI 40–60, Stenter pin chain | Brückner, Monforts, Babcock |
| Rewinder / Sheeter | ANSI 35–60 | Voith, Jagenberg, PCMC |
*브랜드명은 상호 참조용으로만 사용되며, 어떠한 제휴 관계도 없습니다.
📊 Finishing Defect — Root Cause & Sprocket Solution Matrix
Use this diagnostic table to link common finishing defects back to sprocket specifications:
| Defect | Root Cause | Sprocket Fix | Target Spec |
|---|---|---|---|
| Calender barring | Periodic speed variation | Ultra-precision TIR | TIR ≤ 0.015 mm |
| Coating streaks | Applicator speed pulsation | G2.5 balanced + low TIR | TIR ≤ 0.02 mm |
| Fabric width variation | Stenter chain speed drift | Matched precision set | TIR ≤ 0.03 mm pair |
| Web breaks at dryer | Torque pulsation | Precision + balanced | G2.5, TIR ≤ 0.02 mm |
| Rewind telescoping | Speed mismatch unwind/rewind | Anti-backlash matched pair | TIR ≤ 0.02 mm |
| Edge curl (paper) | Uneven cross-machine tension | Precision + correct PCD | PCD tolerance ±0.02 mm |
선택 가이드
- Identify the finishing stage: calender, coater, dryer, stenter, rewinder.
- Determine the product quality standard and translate to sprocket TIR and balance grade using the defect matrix above.
- Specify chain type and pitch from the machine OEM documentation.
- Choose material: C45/40Cr for ambient sections; SS 304/316 for wet or dryer sections; high-temp alloy for > 150 °C.
- For calenders and coaters, always specify matched sets to ensure nip-roller speed consistency.
Contact our paper and textile finishing specialists for machine-specific sprocket recommendations.
설치
- Shut down finishing line and lockout per AS/NZS 4024.
- Thread web through an alternative path or splice to dummy leader.
- Release chain tension; remove guards and access covers.
- Remove old sprocket; use precision puller to avoid shaft damage.
- Clean shaft with lint-free cloth and precision solvent. Inspect for runout.
- Mount new sprocket; verify TIR on-machine with dial indicator before final tightening.
- Re-route chain; set tension per OEM spec (finishing drives typically require tighter tension than general conveyors).
- Lubricate with clean, non-contaminating oil (dry PTFE film for dryer sections).
- Thread web back through finishing section at slow speed.
- Run at 50% speed; check for barring, coating uniformity, or tension variation before ramping to full production.
문제 해결
Visible barring on calendered paper
원인: Calender drive sprocket TIR exceeding 0.03 mm, creating periodic speed variation. 고치다: Replace with ultra-precision sprocket (TIR ≤ 0.015 mm). Verify all calender sprockets as a matched set.
Coating weight variation across web width
원인: Applicator roller speed pulsation from unbalanced sprocket. 고치다: Replace with G2.5 balanced sprocket; verify chain tension.
Fabric width out of specification from stenter
원인: Left/right stenter chain speed mismatch from unequal sprocket wear. 고치다: Replace both drive sprockets as a matched pair.
Web breaks in dryer section
원인: Corroded or warped dryer sprocket causing torque pulsation. 고치다: Replace with SS 316 sprocket; verify dryer can bearing condition.
Rewind roll telescoping
원인: Backlash in rewind drive sprocket creating tension spikes. 고치다: Replace with anti-backlash precision sprocket; recalibrate tension controller.
사례 연구
📍 Maryvale, VIC — Paper Mill (Calender)
Valmet supercalender, 600 m/min. Visible barring pattern repeating every 180 mm on coated printing paper.
결과: Matched set of 6 precision sprockets (TIR ≤ 0.015 mm). Barring eliminated. Premium-grade yield improved from 82% to 97%.
“Barring was our #1 quality downgrade. Precision sprockets eliminated it completely.” — Paper Machine Superintendent
📍 Tumut, NSW — Paper Mill (Coater)
Blade coater applying 12 g/m² clay coating at 450 m/min. Coating streaks appearing at regular intervals.
결과: G2.5 balanced SS 304 applicator-drive sprocket. Coating uniformity improved to ±0.3 g/m² across full web width.
“Streak-free coating means our paper meets the premium printing specification. That’s a higher price per tonne.” — Coater Operator
📍 Laverton, VIC — Textile Finisher (Stenter)
Brückner stenter frame, 80 m/min polyester fabric. Finished width varying ±8 mm (spec: ±3 mm).
결과: Matched pair of precision stenter-drive sprockets. Width variation reduced to ±2 mm.
“Width consistency means every roll meets spec. Returns dropped to near zero.” — Finishing Manager
📍 Botany, NSW — Nonwoven Fabric Producer
Calender bonding line for spunbond nonwoven. Web breaks every 4 hours at dryer transition.
결과: SS 316 dryer-section sprockets replacing corroded carbon-steel units. Web breaks reduced from 6/day to < 1/week.
“Web breaks were destroying our efficiency. Stainless sprockets in the dryer section fixed the root cause.” — Plant Engineer
📍 Broadmeadows, VIC — Packaging Paper Sheeter
Cross-cut sheeter at 300 m/min. Sheet length variation ±1.5 mm (spec: ±0.5 mm).
결과: Anti-backlash precision sprockets on sheeter drive. Length variation reduced to ±0.3 mm.
“Consistent sheet length means our customers’ printing presses don’t jam. That’s the quality that keeps orders coming.” — Sheeter Supervisor
자주 묻는 질문
Do you supply sprockets for Valmet and Voith paper machines?
Yes. We cross-reference and manufacture sprockets for all major paper machine OEMs including Valmet, Voith, and Andritz.
What TIR is needed for supercalender drives?
≤ 0.015 mm TIR is recommended for supercalenders. Standard calenders: ≤ 0.03 mm.
Can you supply matched sprocket sets for calender nip stacks?
네. 저희는 세트에 포함된 모든 스프로킷의 TIR(타이어 표면적) 일관성을 보장하는 매칭 세트를 제조 및 배송합니다.
What material is best for dryer-section sprockets?
SS 316 for dryers up to 180 °C. High-temp alloy for > 180 °C. Carbon steel corrodes rapidly in dryer condensate.
Do you supply stenter chain sprockets?
Yes. We manufacture drive and idler sprockets for Brückner, Monforts, Babcock, and other stenter frames.
Can you supply anti-backlash sprockets for sheeters?
Yes. Our anti-backlash tooth profiles are ideal for cross-cut sheeters and precision rewinders.
What is the lead time for precision finishing sprockets?
Typically 1–2 weeks. Stock precision sizes ship in 3–5 days.
Do you supply to paper mill EPCM projects?
Yes. We work with major paper and pulp EPCM contractors for greenfield and rebuild projects.
What documentation is included?
EN 10204 3.1 material certificates, CMM dimensional reports, dynamic balance certificates, and full traceability. All included.
How does your pricing compare to OEM paper machine parts?
Factory-direct pricing typically 35–55% below OEM list for equivalent quality. 견적을 요청하세요.
관련 항목 — 정밀 체인
저희 제품과 함께 사용해 보세요 precision and stainless roller chains for complete paper and textile finishing drive solutions.
인증
✅ ISO 9001:2015 | ✅ ANSI B29.1 / ISO 606 | ✅ DIN 8187/8188 | ✅ EN 10204 3.1 | ✅ RoHS | ✅ CE
Ever-Power Australia Sprockets Co., Ltd.를 선택해야 하는 이유는 무엇일까요?
와 함께 20년 이상 정밀 스프로킷 제조 경험, we serve paper mills, textile finishers, nonwoven producers, and packaging converters across Australia and 50+ countries. From micro-tolerance calender drives to heavy-duty dryer sprockets, we deliver the precision and durability that finishing demands — backed by full certification and fast Australian delivery.
Finish First — Contact Us
Premium finish starts with precision drive.
Ever-Power Australia Sprockets Co., Ltd. supplies finishing-grade sprockets that eliminate barring, streaks, and width variation — turning your finishing line into a first-grade machine. Contact us for matched sets and precision specifications.
