제품 설명
제품 설명
Colored O-Ring Chain and X-Ring Chain (420, 428, 520 etc.)
X-ring chains and O-ring chains :420\428\428H\520\520H
O-ring chain is mainly suitable for the adverse environment, such as water,mud,or dust.So It ‘s more demanding for its performance.And the service life is about 3-5 times than standard chains
1. The “O” ring or “X” ring will greatly reduce the wearing.
2. Model: 420V, 428V, 428VM, 520V, 428V-X, 428VM-X, 520V-X, 420Hz, 428Hz, 520NZ,
3. Color: Self, gold, nickel, blue, red, orange, green, yellow, pink etc.
4. Certificate of Quality: ISO 9001: 2000,
5. The grease is made in USA.
6. O-ring and X-ring are made in Tianwan.
7. The chains have high tensile strength.
8. Quad-rited pins(pitch≥ 15.875mm)
9. The sealing performance of X-ring is better than O-ring.
Products are made of high quality alloy steel production. The plates are punched and squeezed bores by precision technology. The pin, bush, roller are machined by high-efficiency automatic equipment and automatic grinding equipment, then through heat treatment of carburization, carbon and nitrogen protection mesh belt furnace, surface blasting process etc. Assembled precision by Internal hole position, spin riveted by pressure to ensure the performance of the entire chain.
Company introduction
DINGJIAN WHEEL Co., Ltd locates in Xihu (West Lake) Dis.qiao Industrial Zone which is renowned for the base of China Motorcycle Sprockets Manufacturing. Our company is a typical manufacturing enterprise with designing, manufacturing and selling as a whole service chain.
DINGJIAN WHEEL Co., Ltd was set up in 1996, covering a total land of 12,000 square CZPT and a constructive area of 8,000 square meters. Under a total investment of 20 million RMB yuan, our company owns the most advanced production equipments, perfect quality inspection system, highly efficient sales and management team and first-class technicians; since we adopt advanced production techniques and superior steel, our products have reached high standard of durability and a series of advanced national level. As our products passed the authentication of global ISO9001 quality system, our company has the power of manufacturing a complete set of sprocket products to fit the needs of motorcycle factories.
Since the founding of CZPT WHEEL Co., Ltd, we uphold consistently the principles of laying full emphasis on needs of consumers, products’quality and commercial creditability; stressing the idea of common business aim, business starting, mutual benefits and developments, for building up Double Win relation with clients;our company has won the trust of a wide range of clients by competitive price and better service, this is why our company obtains better goodwill in this sprocket industry with our products selling well China-wide. and selling far to many regions like South-East Asia. Middle-East. South-America. Africa Europe and so on.
For many years, CZPT WHEEL Co., Ltd insisted on a development policy of Enterprise’ Life Relies on Products’ Quality, we are succeed in fulfilling our famous brand position. DINGJlAN people have confidence in our prosperous development, we will believe in the idea of Brand Relies on Quality, and Effectiveness Depends on Scale. By upholding our development idea, we can achieve our CZPT task of becoming leader in sprockets’ industry by persisting in our quality and management idea permanently. DINGJIAN WHEEL Co., Ltd is expecting your cooperation for mutual benefit producing.
>> Feedback
1.Since your feedback is very important to our business’s development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service.
2.Please contact us before disputes or leaving any negative or neutral feedback. We will work with you to solve any problems.Thank you for your understanding!
|
배송비:
단위당 예상 운송비. |
To be negotiated |
|---|
| Usage: | Transmission Chain, Conveyor Chain |
|---|---|
| 재료: | Iron |
| Surface Treatment: | Oil Blooming |
| 샘플: |
US$ 10/Piece
1개 (최소 주문 수량) | 주문 샘플 |
|---|
| 맞춤 설정: |
사용 가능
| 맞춤형 요청 |
|---|
휠과 해당 스프로킷 사이의 적절한 정렬 확보
휠과 스프로킷의 정확한 정렬은 휠 스프로킷 시스템의 원활하고 효율적인 작동에 매우 중요합니다. 정렬이 어긋나면 마모 증가, 소음 발생, 성능 저하로 이어질 수 있습니다. 다음은 정확한 정렬을 위한 몇 가지 단계입니다.
- 정밀 부품을 사용하십시오: 휠 스프로킷은 요구되는 사양을 충족하는 고품질의 정밀 제조 부품이어야 합니다. 정밀하게 가공된 부품을 사용하면 정렬 상태를 개선하는 데 도움이 됩니다.
- 차축 정렬 상태를 확인하십시오: 휠 스프로킷이 장착된 축 또는 샤프트가 똑바로 정렬되어 있는지 확인하십시오. 축이 정렬되지 않으면 휠 스프로킷도 정렬되지 않을 수 있습니다.
- 올바른 설치 방법: 휠 스프로킷이 차축 또는 축에 안전하고 정확하게 장착되었는지 확인하십시오. 작동 중 움직임이나 흔들림을 방지하기 위해 적절한 고정 장치와 조임 방법을 사용하십시오.
- 병렬성 검사: 휠 스프로킷의 축은 서로 평행해야 합니다. 평행 정렬 상태를 확인하려면 여러 지점에서 축 사이의 거리를 측정하십시오.
- 정렬 도구를 사용하세요: 레이저 정렬 시스템과 같은 정렬 도구를 사용하면 휠 스프로킷을 정확하게 정렬할 수 있습니다. 이러한 도구는 정렬 불량을 효과적으로 식별하고 수정하는 데 도움이 됩니다.
- 장력 및 장력 조절기 정렬 상태를 확인하십시오. 시스템에 텐셔너가 사용되는 경우, 텐셔너가 올바르게 정렬되어 체인 또는 벨트에 적절한 장력을 가하고 있는지 확인하십시오. 장력이 잘못되면 정렬 불량이 발생할 수 있습니다.
- 정기 유지보수: 정기적인 유지보수 일정을 수립하여 필요에 따라 휠 얼라인먼트를 점검하고 조정하십시오. 정기적인 점검을 통해 얼라인먼트 문제가 심각한 문제로 발전하기 전에 문제를 파악하고 해결할 수 있습니다.
- 모니터 성능: 휠 스프로킷 시스템의 작동 상태를 주의 깊게 살펴보십시오. 비정상적인 소음, 진동 또는 마모 흔적이 보이면 정렬 불량을 나타낼 수 있으므로 즉시 점검해야 합니다.
휠 스프로킷 시스템의 장기적인 성능과 신뢰성을 위해서는 정확한 정렬이 필수적입니다. 다음 단계를 따르고 정기적인 유지 보수를 실시하면 휠 스프로킷이 조화롭게 작동하여 효율적인 동력 전달을 제공하고 마모를 최소화할 수 있습니다.
Extending the Lifespan of a wheel sprocket Assembly
To ensure a long lifespan for your wheel sprocket assembly, consider the following maintenance and operational practices:
- Regular Lubrication: Apply the appropriate lubricant to the sprocket teeth and chain or belt regularly. Lubrication reduces friction, wear, and the likelihood of premature failure.
- Proper Tension: Maintain the correct tension in the chain or belt to prevent excessive stress and wear. Follow the manufacturer’s guidelines for tensioning.
- Alignment: Ensure precise alignment between the wheel sprocket. Misalignment can cause accelerated wear and increase the risk of failure.
- Inspections: Regularly inspect the wheel, sprocket, chain, or belt for signs of wear, damage, or fatigue. Replace any worn-out or damaged components promptly.
- Cleanliness: Keep the wheel sprocket assembly clean from dirt, debris, and contaminants that can contribute to wear and corrosion.
- Correct Usage: Operate the machinery within the recommended speed, load, and temperature limits specified by the manufacturer.
- Training and Operator Awareness: Ensure that equipment operators are properly trained to use the machinery correctly and are aware of maintenance procedures.
- Use Quality Components: Invest in high-quality wheels, sprockets, chains, or belts from reputable suppliers to improve durability and reliability.
- Replace Components in Sets: When replacing parts, consider replacing the entire set (e.g., chain and sprockets) to maintain uniform wear and performance.
- Address Vibration Issues: Excessive vibration can accelerate wear. Investigate and address any vibration problems promptly.
By following these practices, you can significantly extend the lifespan of your wheel sprocket assembly, reduce downtime, and enhance the overall efficiency and safety of your machinery.
Advantages of Using a wheel sprocket Configuration
Using a wheel sprocket configuration for power transmission offers several advantages over other methods. Here are some key benefits:
1. Efficient Power Transmission:
The wheel sprocket assembly provide a highly efficient method of transmitting power between shafts with minimal energy loss. The teeth of the sprocket mesh with the links of the chain or the teeth of another sprocket, ensuring a positive engagement that reduces slippage and maximizes power transfer.
2. Versatility:
Wheels and sprockets are available in various sizes, configurations, and materials, making them highly versatile components for different applications. They can accommodate a wide range of speed and torque requirements, making them suitable for various mechanical systems.
3. Compact Design:
The compact design of wheel sprocket assemblies allows for space-saving installations in machinery. The concentric arrangement of the components minimizes the overall footprint, making it ideal for applications with limited space.
4. Precise Speed Control:
By selecting sprockets with different numbers of teeth, the gear ratio can be easily adjusted to achieve precise speed control in the driven shaft. This level of control is essential for many applications, such as conveyor systems, where different speeds are required for different processes.
5. High Torque Capacity:
wheel sprocket systems can handle high torque loads, making them suitable for heavy-duty applications. This high torque capacity is especially beneficial in industrial settings where large loads need to be moved or lifted.
6. Smooth and Quiet Operation:
When properly lubricated and maintained, the interaction between the sprocket and the chain or other sprockets results in smooth and quiet operation. This makes wheel sprocket systems preferable in applications where noise reduction is important.
7. Easy Installation and Maintenance:
Installing a wheel sprocket assembly is relatively straightforward, and they require minimal maintenance when used correctly. Periodic lubrication and tension adjustments are typically all that is needed to keep the system running smoothly.
8. Suitable for High-Speed Applications:
wheel sprocket configurations are well-suited for high-speed applications where belts or gears may not be as practical due to limitations in speed capabilities.
In summary, the wheel sprocket configuration offers efficient power transmission, versatility, compactness, precise speed control, high torque capacity, smooth operation, and ease of installation and maintenance. These advantages make it a popular choice in a wide range of mechanical systems and industrial applications.
editor by CX 2023-09-28
