China 1012”1416 Bar Match M10 M12 M14 Spindle for Woodworking Electric Angle Grinder Chain Saw Adapter Converter Bracket manufacturer

Grade: Diy
Warranty: 1 several years
Motor Displacement: Other
Electrical power: 1800W
Tailored support: OEM
Product Variety: 3016
Characteristic: Swift Tight Chain Tensioner
Electrical power Supply: Electric powered, Battery
Item Name: Angle Grinder Adapter
Chain Pitch: 3/eight
Chain Gauge: .050/1.3mm
Bar dimension: 10
Packaging Details: 1 picec 1 coloration box

Specification:This Chain Noticed BracketFree installation Established suits one hundred/one hundred fifteen/one hundred fifty angle grider.Xihu (West Lake) Dis. Bar Content: Spring steelChain Content : High Carbon SteelConnecting Rod Size: (M10 or M14) Chain wheel diameter:(10mm/14mm) Xihu (West Lake) Dis. bar size: about 48cm Size, 6.5cm WidthChain Enamel: 29Chain circle size: about 108cmChain Thickness: approx. 4.7mmDrive Website link Amount: 45 sectionsChain Enter Energy: max.1200 wWood Cutting Diameter (depth): about 28cmBracket All round duration: about 39cmHandle top: about 18cmWith protective go over.Bundle Included:1 x Chain Observed Bracket Established (Does Not Incorporate Angle Grinder)(1. Handle 2. Plastic protect 3. Chain 4. Xihu (West Lake) Dis. 5. Protective protect 6. Huge aluminum 7. Hex wrench 8. M10 or M14 tiny sprocket 10.Self-tapping screw 11. Oil can tube 12. Chain stress changing screw thirteen. Hexagon socket screw fourteen. Little aluminum piece fifteen. M14large sprocket sixteen. Hexagon screw nut 17.Set up instructionsNotice:1. Please enable a little bit error owing to handbook measurement. you should make confident you do not mind prior to you bid.2. The shade may possibly have various as the big difference exhibit, pls realize. Characteristics:1. This Chain Saw Bracket Established matches 100/one hundred fifteen/one hundred fifty angle grider.2. Automated refueling, with protecting protect.3. Ergonomic deal with which is very handy and safer for carrying.4. Its input electricity relies upon on your possess angle grinder, so it is not a specified amount.5. Safety of sawing, efficiently improve the performance of your work.6. The chain interval with the counter-attack shrapnel, Luxurious Designer Jewelry Trend 316L Stainless Steel Christmas Screwdriver Bangle Enjoy Few Screw Model Bracelet for Ladies information oil gap, make to use much more safe.7. These noticed chains are an improved version of the CZPT noticed chain and are semi expert chains. Specification

Place of Origin:ZHangZhouG, ChinaBrand Identify:LIYINGModel Quantity:3016Power Type:Electric power
Type:Long Reach ChainsawsFeature:Anti-SlipFits Design of Established suits angle grider.:100/one hundred twenty five/150Saw Sort:Reciprocating Noticed
Rated Input Electrical power:1200wApplication:Wood NoticedXihu (West Lake) Dis. Bar Content:Spring steelChain Material:High Carbon Steel
Connecting Rod Measurement:M10 / M16Chain wheel diameter:10mm/16mmXihu (West Lake) Dis. bar dimension::34cm Length, 6cm Widthkeywords:chainsaw elements
Packing & Shipping and delivery bundle dimensions: 48*14*7cmA box packagesize :51*30*38cmSingle gross excess weight:1.8kgsNW:1.7KGS Ship port:HangZhou ZheJiang HangZhouPACKING:One Set 1 Color BOX, Company Profile Organization certification Make contact with us YOU May ALSO LIEK FAQ Q: Are you trading organization or manufacturer ?A: We are a comprehensive company.Q: How prolonged is your supply time?A: In common,it would only need to have 5-fifteen times to complete! Coupling Company WH1 Oldham Coupling 45# metal flexible shaft connector Manufacturing unit Cost electrical power transmission Hot Sale Q: Do you give samples ? Is it free or added ?A: Of course, we could provide the sample for free demand but do not shell out the price of freight.Q: Can we get 1 sample to validate just before purchase?A: Yeah,it would be no problem to get 1 sample to verify prior to each of us agree on the value!Q:What is your soon after provider?A:We always commit to what we guarantee to consumers,in case there are any high quality troubles happen inside the warrant period that by ourside,we will get our accountability.Q: Can you do customized packaging (with designs on them) for person retail marketing? What is the per device cost?A: Sure, certain. Your special design is welcome. The unit expense is dependent on the coloration and measurement of your layout. Please deliver us your for quotation.


Sprocket Basics

When it comes to sprockets, it’s important to understand the basics of design. This includes chain size and number of teeth. The number of teeth will vary depending on the type of chain and application. When determining the number of teeth, the angle between the teeth should be at least 360 degrees.


There are many factors to consider when choosing the correct sprocket size. The first thing to do is to determine if the sprocket is a double sprocket or a single sprocket. Also available in a variety of sizes. To determine the exact size, you should measure the distance between the grooves of the sprocket teeth and their opposite tooth slots. The distance between these two points is called the caliper diameter.
The size of the sprockets also varies depending on the type of chain. Large sprockets have arms, while smaller sprockets usually don’t. The arms reduce weight and inertia, making them more economical to operate. Some sprockets also have openings, which make them easier to assemble and disassemble. Some sprockets are also plated for a stronger construction. Some sprockets are manufactured with flame or induction hardened parts.
Sprockets are often used in conveyors, pallet conveyors and other conveying systems. The size of the sprocket should match the size of the chain. A caliper will help you determine if the sprocket has worn teeth. Another way to identify worn sprockets is to measure their diameter.
In addition to size, sprockets should have the correct pitch and center distance. This will help keep the roller chain taut. The chain should be clean and properly lubricated. There should be a small gap between the pin and bushing so that oil can pass through the sprocket and chain. In addition to this, the center-to-center distance between the chain and the sprocket should be at least 1.5 times the diameter of the sprocket.
The chain should have at least 17 teeth, which is common in the industry. Having smaller spacing will reduce mechanical losses and noise. However, larger sprocket sizes are best for applications with higher workloads.


Sprockets are mechanical parts that mesh with the chain to move the chain. It is made of metal or reinforced plastic and usually resembles a gear. It is a gear design for a specific type of chain. Most sprocket and chain systems work the same way, although they vary in material and pitch.
There are three basic types of sprockets: single-strand, double-strand, and triple-strand. The length and number of teeth for each type are specified by various standards. For reference, the ISO-DIN standard is shown. Most sprockets are made of alloy steel and are case hardened and tempered in the tooth area. They also have a hub and a key for mounting.
Metal sprockets can be made of steel or aluminum alloys. While steel is a more durable material, aluminum sprockets are more attractive. Steel is the best material for long rides, while aluminum sprockets are better for casual riding.
In addition to automotive and industrial applications, sprockets are used in oil and gas, textile machinery, instrumentation and mechanical transmission. Many types of sprockets are interchangeable with each other. For added protection, they can also be galvanized to prevent rust. The main methods of galvanizing sprockets are hot-dip galvanizing and electro-galvanizing.
Sprockets are usually made of steel or aluminum. Their design is similar to that of gears, although they are more widely spaced than their counterparts. They can also span longer distances than gears, allowing them to be used for power transmission.


A chain drive is a common type of mechanical transmission in which sprockets are used to help reduce the speed of a moving object. Sprockets can have horizontal, vertical or inclined pitch and are usually used in pairs. The teeth of the sprocket mesh with the rollers on the drive chain, reducing the speed. These sprockets are usually made of metal, but can also be made of plastic or composite materials.
The role of the sprocket is to transmit motion from the output shaft of the engine to the rear wheels. For this, the front sprocket needs to rotate at the same speed as the engine output shaft. It can be mounted either on the drive track or on the front of the vehicle. A third sprocket can be connected to the drive track. In addition, the front sprocket is used to pull the drive chain. This will help transfer power from the engine to the rear wheels, allowing the motorcycle to travel forward. The side plates of the chain also help transmit chain tension.
The bushings are subjected to the tension applied to the chain as it passes through the sprockets thousands of times per minute. This puts pressure on the pin inside the bushing. Additionally, the pins must withstand bending and shearing forces transmitted from the plate to the bushing. The pins must also withstand impact and have high tensile strength. If the pin is worn, it will need to be replaced or repaired.
Sprockets power the chain-driven motion system and carry heavy loads. Proper selection of sprockets can prevent damage to your equipment. To do this, you need to select the appropriate sprocket based on the type of assembly and system specification.


Sprocket maintenance is an important part of motorcycle maintenance. Failure to do so will result in frequent chain changes and additional costs. Regular maintenance of your chain will help ensure your chain will last 30,000 miles or more. By comparison, a poorly maintained chain only lasts 10,000 miles.
Checking the sprocket is very easy. First, remove the chain and align it. Next, check for any foreign objects. If you see a damaged sprocket, you need to replace it. If you can’t replace a worn sprocket, you can buy a new chain. However, the new chain will not last as long as the old one.
Check for signs of rust. Rust can form on the chain due to exposure to humidity and heat. When the pins or rollers get rusted, the seals are damaged. If the pins or rollers are rusted, it’s time to replace the chain.
Regular maintenance of the chain is important to prevent kinks and slippage. This can cause excessive wear on the sprockets and chain. If the teeth are worn, the chain will not be able to properly grip the sprocket, resulting in difficult shifting and severe vibration.
If your chain is several years old, it is important to lubricate it every few months to prevent rust. It is also important to clean the chain thoroughly before lubricating to keep it clean and lubricated. Non-petroleum-based cleaners can help remove grit that may have built up. If you use the chain for a long time, you will need to clean it every 300-600 miles.

China 1012”1416  Bar Match M10 M12 M14 Spindle for Woodworking Electric Angle Grinder Chain Saw Adapter Converter Bracket     manufacturer China 1012”1416  Bar Match M10 M12 M14 Spindle for Woodworking Electric Angle Grinder Chain Saw Adapter Converter Bracket     manufacturer
editor by Cx 2023-06-15