Tag Archives: transmission gearbox

China Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains CNC Machine Non-Standard Spur Gear Sprocket From China Manufacturer drive sprocket

Product Description

SPROCKET  1/2” X 5/16”  08B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

 

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 
 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 


/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.
sprocket

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.

Function

Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
sprocket

element

Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
sprocket

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains CNC Machine Non-Standard Spur Gear Sprocket From China Manufacturer     drive sprocketChina Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains CNC Machine Non-Standard Spur Gear Sprocket From China Manufacturer     drive sprocket
editor by CX2023-03-28

in Shizuoka Japan sales price shop near me near me shop factory supplier Wpa Worm Gear Reducer Small Gearbox Large Turbine Transmission Vertical Wpo Stirring Horizontal Transmission Parts manufacturer best Cost Custom Cheap wholesaler

  in Shizuoka Japan  sales   price   shop   near me   near me shop   factory   supplier Wpa Worm Gear Reducer Small Gearbox Large Turbine Transmission Vertical Wpo Stirring Horizontal Transmission Parts manufacturer   best   Cost   Custom   Cheap   wholesaler

“We are constantly serving our clients with our greatest items.” We are looking forward to establishing effective enterprise associations with new clientele about the planet in the foreseeable future. Keeping in brain that good support is the key to cooperating with clientele, we strive to satisfy substantial quality standards, offer aggressive prices and ensure prompt shipping and delivery.

Solution Introduce:

WP Collection WORM Equipment Speed EPT

WP series EPT, worm is produced of 45 # higher quality metal by heat remedy, and worm wheel is solid with tin bronze. It has very good wear resistance, eEPTly in bearing capability. It is mainly appropriate for deceleration EPT of different mechanical products this sort of as plastics, metallurgy, EPTrage, EPT, lifting and transportation, chemical construction and so on.

Product Information:

wp series structure drawing:

Pace Ratio 1/10 1/15 one/twenty one/25 1/thirty one/forty one/50 1/sixty
Performance 77~90% seventy six~88% 75~84% seventy two~82% 68~eighty two% 64~seventy five% sixty two~72% sixty~71%

WP Collection WORM Gear Speed EPT Functions:

one.Drive effortlessly, vibration, impact and sounds are small, deceleration ratio is large, versaEPTty is extensive, and can be used with a variety of mechanical products.

two.Huge EPT ratio can be attained by one-phase EPT, and the structure is compact. Most kinds of EPTs have much better self-locking efficiency. Braking products can be saved for mechanical equipment with braking needs.

three.The meshing friction loss between worm tooth and worm EPT tooth area is greater, so the EPT performance is reduce than that of EPT, easy to warmth and large temperature.

four.Higher specifications for lubrication and cooling.

five.Great compatibility, worm EPT and worm are manufactured according to nationwide stXiHu (West Lake) Dis.Hu (West Lake) Dis.rds, bearing, oil seal and other stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd components are utilised.

Product marketing and advertising:
NMRV worm EPT AC motor X/B series cycloid planetary EPT

product link:
https://EPTngsuEPT.en.manufactured-in-china.com/product/KCnmZXOyeokF/EPT-Nmrv50-90-Degree-EPT-EPT-Velocity-EPT-Rates-Worm-Gear-Box-EPT.html
merchandise website link:
https://EPTngsuEPT.en.created-in-china.com/solution/YNgESCvyGOhb/EPT-High-EPT-3-Section-Synchronous-EPT-1-1kw-1-5HP-AC-EPT-Y2-Sequence-3-Section-Asynchronous-Electric-EPT.html
item hyperlink:
https://EPTngsuEPT.en.produced-in-china.com/item/NyfJTsAonMWb/EPT-Xwd5-Cycloidal-EPT-Planetary-EPT-with-EPT.html

Our Organization:

EPTngsu EPT Equipment EPT Co., Ltd.

Our firm was established in 2018. It was started by a group of young folks with EPTrprising spirit. It is deterEPTd to make a very good EPT box in 100 many years. The firm is fifty-one hundred individuals, with professional R ampampD, design, sales crew, items promote well at house and overseas, the industry is mainly concentrated overEPT. Supply clients with individualized remedies. On the basis of reciprocity and mutual gain, EPT insists on meeting customers’needs with higher top quality and effective services.

We have skilled engineers who can give you with individualized solutions to satisfy distinct wants. EPT can fulfill the requirements of several software locations. Silk and EPTium goods can satisfy the requirements of numerous software fields. They have been productively applied in meat, seafood and aquatic items processing business, baking market, cHangEPT business, EPTrage and dairy merchandise processing market, fruit and vegetable processing industry, pharmaceutical and cosmetics industry and battery production, corrugated paper manufacturing, tire production and other manufacturing fields.

EPT and EPT:
*EPT: In orEPTto ensure the integrity of solution physical appearance, we will decide on cartons, picket pallets and wooden pallets according to client needs.

*Supply time: Each and every EPT is made and tested in accordance with rigorous and fastened techniques to guarantee that the good quality is proper ahead of leaving the manufacturing facility and shipping and delivery on time.

*Transportation method: We will decide on the most suitable method of transportation for our clients in accordance to the weigEPT and size of the merchandise. We can also pick the manner of transportation in accordance to the requirements of our buyers.

*Receiving and right after-sales support: Following obtaining the items, make sure you examine no matter whether they are in good problem. We will supply customers with excellent after-revenue service.

FAQ:
Q1: Are you a trading business or a maker ?
A: We are a company in EPTngsu Province, EPT. Our organization owns the capacity of production, processing, developing and R ampD. We welcome your go to.

Q2: How we decide on versions and specifications?
A: In accordance to the specific specifics of the requires from the portion of enquiry, we will suggest the products’ models on synthesizing the factors of discipline of merchandise utilization, EPT, torque arm and ratio…

Q3: How is your value? Can you provide any low cost?
A: Our rates are alwaEPTcompetitive. If the buyer can area a large order, we definitely will allow price cut.

This autumn: How EPT should I hold out for the comments soon after I send out the enquiry?
A4: We will reply as shortly as attainable, twelve hours at most.

Q5: What is your solution warranty time period?
A: We have the certifications of ISO9001,CE, SGS.

Q6: What EPT are your EPTes being employed?
A: Our EPTes are commonly used to metallurgical gear, mining equipment, EPT tools, food EPTry, EPT gear, tobacco gear and so on.

We hope to hear from you. We will sincerely and warmly serve you and recommend our ideal items to you, if you any intersted in our products,please speak to us:

  in Shizuoka Japan  sales   price   shop   near me   near me shop   factory   supplier Wpa Worm Gear Reducer Small Gearbox Large Turbine Transmission Vertical Wpo Stirring Horizontal Transmission Parts manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Shizuoka Japan  sales   price   shop   near me   near me shop   factory   supplier Wpa Worm Gear Reducer Small Gearbox Large Turbine Transmission Vertical Wpo Stirring Horizontal Transmission Parts manufacturer   best   Cost   Custom   Cheap   wholesaler

in Saltillo Mexico sales price shop near me near me shop factory supplier Bx Cycloidal Drive Transmission Gear Reducer Speed Gearbox manufacturer best Cost Custom Cheap wholesaler

  in Saltillo Mexico  sales   price   shop   near me   near me shop   factory   supplier Bx Cycloidal Drive Transmission Gear Reducer Speed Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

PersonnelOur income individuals are effectively educated to accommodate your requests and talk English for your usefulness. With EPG brand name registered in more than 70 countries like America , Europe , Japan and so on, it has associates among globe leading enterprises, this kind of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so forth. our products are promoting effectively in the American, European, South American and Asian markets.


Rated Input EPT of Cycloidal EPT for Single-phase EPT

Stand no. EPT Ratio
eleven 17 23 29 35 forty three fifty nine 71 87
X2
B0
.75
.55
.55 .37
.twenty five
X3
B1
2.two
one.five
1.five
one.1
1.1
.75
.fifty five
X4
B2
4
three
2.2
1.5
1.five
1.1
one.1
.seventy five
.75
X5
B3
seven.five
five.5
5.five
four
4
three
3
2.two
2.2
1.5
one.five
X6
B4
11
7.5
7.five
5.five
five.5
4
4
3
3
two.two
two.2
X7 fifteen
eleven
11
7.five
7.5
five.5
5.five
four
four
X8
B5
18.five
15
15
11
eleven
seven.5
7.5
5.5
5.5
X9
B6
22
18.5
eighteen.five
15
15
eleven
eleven

Feature:

Higher pace ratio and large effectiveness of solitary stage EPT, can achieve one:87 reduction ratio, the performance of a lot more than ninety%, if the use of multi-phase EPT, reduction ratio is more substantial.
Compact structure and little volume thanks to the adoption of planetary EPT basic principle, the enter shaft output shaft in the very same aXiHu (West Lake) Dis.s line, so that its product to acquire the smallest possible dimension.
Clean running sounds reduced cycloidal needle tooth meshing tooth variety, overlap coefficient is big and has the mechanism of parts equilibrium, vibration and sounds limit in the bare minimum diploma.
The use of reliable, EPT lifestyle because the main components of the higher carbon chromium metal substance, right after quenching treatment (HRC58 ~ sixty two) to acquire high energy, and, element of the EPT get in touch with utilizing rolling friction, so EPT existence.

Software area

Cycloid EPT EPT employs cycloid tooth meshing, planetary EPT basic principle, so it is normally known as planetary cycloid EPT.
Planetary cycloid pin-wheel EPT can be broadly utilized in petroleum, environmental safety, chemical industry, cement, transportation, textile, pharmaceutical, meals, printing, lifting, mining, metallurgy, construction, EPT generation and other EPT, as a driving or decelerating device, the EPT is divided into horizontal, vertical, biaXiHu (West Lake) Dis.al and direct assembly manner.
Its EPT sleek construction in many circumstances can change the common cylindrical EPT EPT and worm EPT EPT, therefore, planetary cycloid EPT EPT is commonly used in a variety of EPT and fields, by the greater part of customers are EPTly welcomed.

Characteristics of transportation and EPT

Limited shipping and delivery period,to ensure well timed supply.
TigEPT EPT,to guarantee the products are not destroyed throughout transportation.
Different modes of transportation,to ensure protected and well timed transportation
Follow up the EPT approach of get,to guarantee product supply to consumers.
EPT shelf existence, to guarantee customer experience.

FAQ

Q1: Are you a buying and selling firm or a company ?
A: We are a manufacturer in EPTngsu Province, EPT. Our business owns the capability of manufacturing, processing, designing and R ampD. We welcome your check out.

Q2: How we select models and specifications?
A: In accordance to the specific information of the demands from the element of enquiry, we will recommend the products’ types upon synthesizing the elements of discipline of merchandise usage, EPT, torque arm and ratio…

Q3: How is your price tag? Can you provide any price cut?
A: Our rates are alwaEPTcompetitive. If the client can spot a huge get, we absolutely will enable low cost.

This fall: How EPT ought to I hold out for the suggestions soon after I deliver the enquiry?
A: We will reply the enquiries without having any delay, 12 hrs at most.

Q5: What is your product warranty time period?
A: We have the certifications of ISO99001,CE,

Q6: What EPT are your EPTes currently being utilized?
A: Our EPTes are commonly utilized to metallurgical tools, mining tools, EPT equipment, food EPTry, EPT equipment, tobacco equipment and so on.

  in Saltillo Mexico  sales   price   shop   near me   near me shop   factory   supplier Bx Cycloidal Drive Transmission Gear Reducer Speed Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Saltillo Mexico  sales   price   shop   near me   near me shop   factory   supplier Bx Cycloidal Drive Transmission Gear Reducer Speed Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

in Tehran Iran (Islamic Republic of) sales price shop near me near me shop factory supplier High Transmission Extruder Gearbox manufacturer best Cost Custom Cheap wholesaler

  in Tehran Iran (Islamic Republic of)  sales   price   shop   near me   near me shop   factory   supplier High Transmission Extruder Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

Our goods are applied in many fields. We are aiming to meet the calls for of the clientele around the entire world.. EPG has set up a total established of high quality administration program which is offered with advanced inspection and examination products. High EPT extruEPTEPT

Superiority
1) Small volume
two) Big EPT torque
three) Substantial efficiency
4) Minimal use

About EPT :
ZLYJ EPT sequence are EPT devices, which are EPTly made for one-screw extruEPTwith substantial precision, tough EPT surface area, accompany with thrust. Adopting the technical requirements stipulated in JB/T9050.1-1999, all ZLYJ EPTes are designed appropriately.
Principal Characteristics:
one. The substance of EPT is the large energy alloy steel, it is manufactured by carburizing, quenching (and other heat treatment method), gringding method at final. The EPT is in substantial precison ( six quality ) and high hardness ( reaches HRC54-sixty two). Apart from, it features reduced sounds when operating.
2. It is made up of higher bearing capacity thrust, which is executed reliable and can stand up to more substantial aXiHu (West Lake) Dis.al thrust.
three. All the products are taken care of by forced lubrication and cooling program except extremely couple of small specification items.
four. ZLYJ collection EPT is adopted by 6-side processing box. Its standard set up is horizontal, but can also be transformed to vertical set up according to customer’s requirment.
5. Efficiency EPT, lower sound, EPT operaton time.

Primary technicl parameters :

Sort Spec Input EPT(kw) N( EPTr) N(output) Output Torque Permitted aXiHu (West Lake) Dis.al thrust of output shaft(KN) Screw Diameter Length-diameter ratio
(N@m)
ZLYJ 112-eight five.five 800 100 525 35 Oslash35 twenty five:01:00
133-eight eight 800 one hundred 764 39 Oslash50 twenty five:01:00
146-10 eleven 1000 one hundred 1050 54 Oslash55 25:01:00
173-ten eighteen.5 900 90 1962 110 Oslash65 twenty five:01:00
200-twelve.5 thirty a thousand 80 3581 155 Oslash75 twenty five:01:00
225-12.5 45 1000 eighty 5371 a hundred and eighty Oslash90 twenty five:01:00
250-16 fifty five 1120 70 7503 192 Oslash105 25:01:00
280-16 75 960 sixty 7643 258 Oslash110 twenty five:01:00
315-16 eighty five 960 60 13528 287 Oslash120 25:01:00
330-16 one hundred ten 960 sixty 17507 360 Oslash135 25:01:00
375-sixteen 132 960 sixty 21008 390 Oslash150 25:01:00
395-16 185 960 60 29442 400 Oslash160 25:01:00
420-16 one hundred sixty 960 60 31831 430 Oslash160 25:01:00
420-sixteen 220 960 60 31831 430 Oslash170 twenty five:01:00
450-20 213 one thousand sixty 40640 five hundred Oslash160/ Oslash170 twenty five:01:00
560-17 540 1000 50 84034 700 Oslash200 25:01:00
630-10 540 one thousand fifty 15712 770 Oslash250 25:01:00

Why choose us?
A gt EPT time knowledge and historical past
B gt EPT time nitriding treatment and heating treatment method by itself
C gtEPT Fanuk series CNC computer-managed milling EPTs
D gtdepth gap drilling EPT in 18meters length, which make certain the straigtnss of barrel inside of.
E gt CAD drawing affirmation ahead of begin making
F gt Prompt soon after sale provider
G gtLand proprietor and registration money twenty five, 000, 000RMB

About our organization :

EPT EPT plastic EPTry co.,ltd is situated in HangEPT HangEPT city
with brand of PYM(Former HangEPT XiHu (West Lake) Dis. EPT screw co.ltd because 1988). The company is EPTized in making screw barrel, EPT zlyj series,
t die, filter and extruder EPT. It has become 1 of the premier
supplier of major parts in HangEPT metropolis which is the basement of plastic
EPTs.

Ready for your inquiry ! Welcome to our firm .

  in Tehran Iran (Islamic Republic of)  sales   price   shop   near me   near me shop   factory   supplier High Transmission Extruder Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Tehran Iran (Islamic Republic of)  sales   price   shop   near me   near me shop   factory   supplier High Transmission Extruder Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

in San Jose Costa Rica sales price shop near me near me shop factory supplier T Series Power Transmission Screw Ta Shaft Mounted Gearbox Speed Variator High Torque Low Rpm Gearbox Lifting Jack Screw Jack manufacturer best Cost Custom Cheap wholesaler

  in San Jose Costa Rica  sales   price   shop   near me   near me shop   factory   supplier T Series Power Transmission Screw Ta Shaft Mounted Gearbox Speed Variator High Torque Low Rpm Gearbox Lifting Jack Screw Jack manufacturer   best   Cost   Custom   Cheap   wholesaler

Provider & Top quality controlWe supply comprehensive drawings and provide every time required. In this way, our products have continued to gain industry acceptance and consumers fulfillment over the earlier handful of several years. Our major items are Needle Roller bearings, Cylindrical Roller Bearings, Rod end Bearings, Spherical plain bearings, Track roller Bearings for Guideway, Roller Bearings, Mix Bearings for forklifts, H2o Pump Bearings, SNR Auto Bearings and all varieties of Spherical Bearings.

T sequence Spiral EPTl EPT EPT 90 diploma EPT EPT Modest RigEPT Angle Spiral EPTl Equipment Steering EPT

Merchandise Description

Benefit:

-Self-locking capacity
-Can be EPTn right by motor or other EPT or manual
-Can be customized in accordance user’s demand
-Compact configuration, small dimension, lightweight
-Hassle-free set up, fleXiHu (West Lake) Dis.ble procedure
-Large trustworthiness and stability
-EPT services life
-Much more connection kind and so forth.
Screw jak is used to all fields for lifting or pulling, this kind of as EPT servicing system, EPT plate, EPTry, metallurgy, water conservancy, health-related treatment method, chemical business, culture and hygienist and so on.

Technical specs:
1.Tseries sprial EPTl EPT EPT with a variety of kinds are stXiHu (West Lake) Dis.Hu (West Lake) Dis.rdized
two.all ratio of one:1,1.5:twelve:12.five:13:fourteen:1and 5:1 are actual ones,
3.regular effectiveness is 98%.

Merchandise Identify T series Spiral EPTl EPT
design no. T2, T4, T6, T7, T8, T10, T12, T16, T20, T25
Ratio 1:one, 1.5:one, two:one, 2.5:1,three:one,4:1,5:1
EPT EPT high quality artificial diamond 50CrMnT
Gear Processing Grinding finish by HOFLER Grinding EPTs, EPT quality : DIN 4
spindle large EPT metal alloy 40Cr piece
Sounds Take a look at Bellow 65dB
Guarantee one yr

Firm Information

EPT management

EPT

EPT Specifics: StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd carton/Pallet/StXiHu (West Lake) Dis.Hu (West Lake) Dis.rd picket case

Delivery Details : 15-thirty functioning daEPTupon payment

Our Certifications

Relevant Item

EPT Planetary EPT

EPT Planetary EPT Robotic RV EPT speed EPT
Customized created Non-stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd EPT UDL Collection Variator
PYZ Collection Helical Tooth Shaft Mounted EPT 8000 Sequence Cycloidal EPT
SLT Series Spiral EPTl EPT SLSWL Series Worm Screw Jack
SLP Series Planetary EPT SLH/SLB Sequence Large EPT EPT
NMRV Sequence Worm EPT BKM Collection Helical-hypoid EPT
SLRC Sequence Helical EPT SLSMR Sequence Shaft Mounted EPT
SLXG Sequence Shaft Mounted EPT X/B Collection Cycloidal EPT
SLR/SEPT/SLK/SLS Collection Helical EPT AC/DC EPT

FAQ

one.Payment Time period: TT, L/C

2.Delivery time: about thirty daEPTfrom EPT payment.

three.We settle for tailored products as for each your EPT prerequisite.

four.XiHu (West Lake) Dis.hu (West Lake) Dis.strains for the Selection:Normally we can choose a single EPT which is appropriate for you with some informations from you,this kind of as ratio/motor speed/mounting dimension/ out torque etc.

5.If the minimal orEPTamount is in excessive of $10000, there are preferential.

Q1: What details need to I explain to you to validate the merchandise?

A:Product/Dimension, EPT Ratio, Shaft directions amp OrEPTquantity.

Q2: What can i do if I don’t know which a single EPT?

A:Dont fret, Deliver as a lot data as you can, our group will help you locate the rigEPT a single you are searching for.

Q3: What is your solution guarantee interval?

A:We supply 1 12 months guarantee considering that the vessel departure date remaining EPT.

This autumn: Are you investing company or producer ?

A: We are manufacturing unit.

Q5: How EPT is your shipping time?

A: EPTly it is five-ten daEPTif the items are in stock. or it is 15-twenty daEPTif the merchandise are not in stock, it is according to amount.

Q6: Do you give samples ? is it cost-free or further ?

A: Indeed, we could offer the sample for cost-free demand but do not pay the EPT of freight.

Q7: What is your phrases of payment ?

A: Payment lt=1000USD, one hundred% EPT. Payment gt=1000USD, 30% T/T EPT ,balance just before shippment.

If you have one more question, pls truly feel cost-free to make contact with us as underneath:

Speak to Us

  in San Jose Costa Rica  sales   price   shop   near me   near me shop   factory   supplier T Series Power Transmission Screw Ta Shaft Mounted Gearbox Speed Variator High Torque Low Rpm Gearbox Lifting Jack Screw Jack manufacturer   best   Cost   Custom   Cheap   wholesaler

  in San Jose Costa Rica  sales   price   shop   near me   near me shop   factory   supplier T Series Power Transmission Screw Ta Shaft Mounted Gearbox Speed Variator High Torque Low Rpm Gearbox Lifting Jack Screw Jack manufacturer   best   Cost   Custom   Cheap   wholesaler