Tag Archives: gear transmission

China Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains CNC Machine Non-Standard Spur Gear Sprocket From China Manufacturer drive sprocket

Product Description

SPROCKET  1/2” X 5/16”  08B SERIES SPROCKETS
 

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

 

 

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

BASIC INFO.

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8″,1/2″,5/8″,3/4″,1″,1.25″,1.50″,1.75″,2.00″,2.25″,2.00″,2.25″,2.50″, 3″

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1571, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire Resistant, Oil Resistant, Heat Resistant, CZPT resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

 

INSTALLATION AND USING

The chain spocket, as a drive or deflection for chains, has pockets to hold the chain links with a D-profile cross section with flat side surfaces  parallel to the centre plane of the chain links, and outer surfaces at right angles to the chain link centre plane. The chain links are pressed firmly against the outer surfaces and each of the side surfaces by the angled laying surfaces at the base of the pockets, and also the support surfaces of the wheel body together with the end sides of the webs formed by the leading and trailing walls of the pocket.

NOTICE

When fitting new chainwheels it is very important that a new chain is fitted at the same time, and vice versa. Using an old chain with new sprockets, or a new chain with old sprockets will cause rapid wear.

It is important if you are installing the chainwheels yourself to have the factory service manual specific to your model. Our chainwheels are made to be a direct replacement for your OEM chainwheels and as such, the installation should be performed according to your models service manual.

During use a chain will stretch (i.e. the pins will wear causing extension of the chain). Using a chain which has been stretched more than the above maximum allowance causes the chain to ride up the teeth of the sprocket. This causes damage to the tips of the chainwheels teeth, as the force transmitted by the chain is transmitted entirely through the top of the tooth, rather than the whole tooth. This results in severe wearing of the chainwheel.
 

FOR CHAIN STHangZhouRDS

Standards organizations (such as ANSI and ISO) maintain standards for design, dimensions, and interchangeability of transmission chains. For example, the following Table shows data from ANSI standard B29.1-2011 (Precision Power Transmission Roller Chains, Attachments, and Sprockets) developed by the American Society of Mechanical Engineers (ASME). See the references[8][9][10] for additional information.

ASME/ANSI B29.1-2011 Roller Chain Standard SizesSizePitchMaximum Roller DiameterMinimum Ultimate Tensile StrengthMeasuring Load25

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

For mnemonic purposes, below is another presentation of key dimensions from the same standard, expressed in fractions of an inch (which was part of the thinking behind the choice of preferred numbers in the ANSI standard):

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

Notes:
1. The pitch is the distance between roller centers. The width is the distance between the link plates (i.e. slightly more than the roller width to allow for clearance).
2. The right-hand digit of the standard denotes 0 = normal chain, 1 = lightweight chain, 5 = rollerless bushing chain.
3. The left-hand digit denotes the number of eighths of an inch that make up the pitch.
4. An “H” following the standard number denotes heavyweight chain. A hyphenated number following the standard number denotes double-strand (2), triple-strand (3), and so on. Thus 60H-3 denotes number 60 heavyweight triple-strand chain.
 A typical bicycle chain (for derailleur gears) uses narrow 1⁄2-inch-pitch chain. The width of the chain is variable, and does not affect the load capacity. The more sprockets at the rear wheel (historically 3-6, nowadays 7-12 sprockets), the narrower the chain. Chains are sold according to the number of speeds they are designed to work with, for example, “10 speed chain”. Hub gear or single speed bicycles use 1/2″ x 1/8″ chains, where 1/8″ refers to the maximum thickness of a sprocket that can be used with the chain.

Typically chains with parallel shaped links have an even number of links, with each narrow link followed by a broad one. Chains built up with a uniform type of link, narrow at 1 and broad at the other end, can be made with an odd number of links, which can be an advantage to adapt to a special chainwheel-distance; on the other side such a chain tends to be not so strong.

Roller chains made using ISO standard are sometimes called as isochains.

 

WHY CHOOSE US 
 

1. Reliable Quality Assurance System
2. Cutting-Edge Computer-Controlled CNC Machines
3. Bespoke Solutions from Highly Experienced Specialists
4. Customization and OEM Available for Specific Application
5. Extensive Inventory of Spare Parts and Accessories
6. Well-Developed CZPT Marketing Network
7. Efficient After-Sale Service System

 

The 219 sets of advanced automatic production equipment provide guarantees for high product quality. The 167 engineers and technicians with senior professional titles can design and develop products to meet the exact demands of customers, and OEM customizations are also available with us. Our sound global service network can provide customers with timely after-sales technical services.

We are not just a manufacturer and supplier, but also an industry consultant. We work pro-actively with you to offer expert advice and product recommendations in order to end up with a most cost effective product available for your specific application. The clients we serve CZPT range from end users to distributors and OEMs. Our OEM replacements can be substituted wherever necessary and suitable for both repair and new assemblies.

 


/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Alloy

###

Samples:
US$ 0/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

For Chain Acc.to DIN8187 ISO/R 606
Tooth Radius  r3 13.0mm
Radius Width C 1.3mm
Tooth Width b1 7.0mm
Tooth Width B1 7.2mm
Tooth Width B2 21.0mm
Tooth Width B3 34.9mm
08B SERIES ROLLER CHAINS  
Pitch 12.7 mm
Internal Width 7.75 mm
Roller Diameter 8.51 mm

###

Z de dp SIMPLEX DUPLEX TRIPLEX
D1 D2 D3
8 37.2  33.18  8 10 10
9 41.0  37.13  8 10 10
10 45.2  41.10  8 10 10
11 48.7  45.07  10 10 12
12 53.0  49.07  10 10 12
13 57.4  53.06  10 10 12
14 61.8  57.07  10 10 12
15 65.5  61.09  10 10 12
16 69.5  65.10  10 12 16
17 73.6  69.11  10 12 16
18 77.8  73.14  10 12 16
19 81.7  77.16  10 12 16
20 85.8  81.19  10 12 16
21 89.7  85.22  12 16 16
22 93.8  89.24  12 16 16
23 98.2  93.27  12 16 16
24 101.8  97.29  12 16 16
25 105.8  101.33  12 16 16
26 110.0  105.36  16 16 16
27 114.0  109.40  16 16 16
28 118.0  113.42  16 16 16
29 122.0  117.46  16 16 16
30 126.1  121.50  16 16 16
31 130.2  125.54  16 16 20
32 134.3  129.56  16 16 20
33 138.4  133.60  16 16 20
34 142.6  137.64  16 16 20
35 146.7  141.68  16 16 20
36 151.0  145.72  16 20 20
37 154.6  149.76  16 20 20
38 158.6  153.80  16 20 20
39 162.7  157.83  16 20 20
40 166.8  161.87  16 20 20
41 171.4  165.91  20 20 25
42 175.4  169.94  20 20 25
43 179.7  173.98  20 20 25
44 183.8  178.02  20 20 25
45 188.0  182.07  20 20 25
46 192.1  186.10  20 20 25
47 196.2  190.14  20 20 25
48 200.3  194.18  20 20 25
49 204.3  198.22  20 20 25
50 208.3  202.26  20 20 25
51 212.1  206.30  20 25 25
52 216.1  210.34  20 25 25
53 220.2  214.37  20 25 25
54 224.1  218.43  20 25 25
55 228.1  222.46  20 25 25
56 232.2  226.50  20 25 25
57 236.4  230.54  20 25 25
58 240.5  234.58  20 25 25
59 244.5  238.62  20 25 25
60 248.6  242.66  20 25 25
62 256.9  250.74  25 25 25
64 265.1  258.82  25 25 25
65 269.0  262.86  25 25 25
66 273.0  266.91  25 25 25
68 281.0  274.99  25 25 25
70 289.0  283.07  25 25 25
72 297.2  291.15  25 25 25
75 309.2  303.28  25 25 25
76 313.2  307.32  25 25 25
78 321.4  315.40  25 25 25
80 329.4  323.49  25 25 25
85 349.0  343.69  25 25 25
90 369.9  363.90  25 25 25
95 390.1  384.11  25 25 25
100 410.3  404.32  25 25 25
110 450.7  444.74  25 25 25
114 466.9  460.91  25 25 25
120 491.2  485.16  25 25 25
125 511.3  505.37  25 25 25

###

Type:

Simplex, Duplex, Triplex

Sprocket Model:

3/8",1/2",5/8",3/4",1",1.25",1.50",1.75",2.00",2.25",2.00",2.25",2.50", 3"

Teeth Number:

9-100

Standard:

ANSI , JIS, DIN, ISO

Material:

1020, 1045, SS304 , SS316;  As Per User Request.

Performance Treatment:

Carburizing, High Frequency Treatment, Hardening and Tempering, Nitriding

Surface Treatment:

Black of Oxidation, Zincing, Nickelage.

Characteristic Fire ResistantOil Resistant, Heat Resistant, Abrasive resistance, Oxidative resistance, Corrosion resistance, etc
Design criterion ISO DIN ANSI & Customer Drawings
Application Industrial transmission equipment
Package Wooden Case / Container and pallet, or made-to-order

Certification:

ISO9001 SGS

Quality Inspection:

Self-check and Final-check

Sample:

ODM&OEM, Trial Order Available and Welcome

Advantage Quality first, Service first, Competitive price, Fast delivery
Delivery Time 10 days for samples. 15 days for official order.

###

ASME/ANSI B29.1-2011 Roller Chain Standard Sizes
Size Pitch Maximum Roller Diameter Minimum Ultimate Tensile Strength Measuring Load
25 0.250 in (6.35 mm) 0.130 in (3.30 mm) 780 lb (350 kg) 18 lb (8.2 kg)
35 0.375 in (9.53 mm) 0.200 in (5.08 mm) 1,760 lb (800 kg) 18 lb (8.2 kg)
41 0.500 in (12.70 mm) 0.306 in (7.77 mm) 1,500 lb (680 kg) 18 lb (8.2 kg)
40 0.500 in (12.70 mm) 0.312 in (7.92 mm) 3,125 lb (1,417 kg) 31 lb (14 kg)
50 0.625 in (15.88 mm) 0.400 in (10.16 mm) 4,880 lb (2,210 kg) 49 lb (22 kg)
60 0.750 in (19.05 mm) 0.469 in (11.91 mm) 7,030 lb (3,190 kg) 70 lb (32 kg)
80 1.000 in (25.40 mm) 0.625 in (15.88 mm) 12,500 lb (5,700 kg) 125 lb (57 kg)
100 1.250 in (31.75 mm) 0.750 in (19.05 mm) 19,531 lb (8,859 kg) 195 lb (88 kg)
120 1.500 in (38.10 mm) 0.875 in (22.23 mm) 28,125 lb (12,757 kg) 281 lb (127 kg)
140 1.750 in (44.45 mm) 1.000 in (25.40 mm) 38,280 lb (17,360 kg) 383 lb (174 kg)
160 2.000 in (50.80 mm) 1.125 in (28.58 mm) 50,000 lb (23,000 kg) 500 lb (230 kg)
180 2.250 in (57.15 mm) 1.460 in (37.08 mm) 63,280 lb (28,700 kg) 633 lb (287 kg)
200 2.500 in (63.50 mm) 1.562 in (39.67 mm) 78,175 lb (35,460 kg) 781 lb (354 kg)
240 3.000 in (76.20 mm) 1.875 in (47.63 mm) 112,500 lb (51,000 kg) 1,000 lb (450 kg

###

Pitch (inches) Pitch expressed
in eighths
ANSI standard
chain number
Width (inches)
14 28 25 18
38 38 35 316
12 48 41 14
12 48 40 516
58 58 50 38
34 68 60 12
1 88 80 58

How to Use Sprocket for Conversion Optimization

The sprocket is usually attached to the shaft with one or more set screws. These set screws are usually ANSI standard sizes. However, these standards are not always suitable for all applications. Therefore, it is important to find a supplier who understands the correct keyway size for a specific application.
sprocket

Typical sprocket

Typical sprocket hardnesses range from 35 to 40 HRC, depending on the application. However, some applications require lower hardness levels. The hardness level is determined by the material used to manufacture the sprocket. Further tempering can further reduce the hardness level. For example, conveyor sprockets with long pitch line thicknesses may not require hardening.
Steel is the most commonly used material for standard sprockets. However, many types of materials can also be used. The material used to make the sprocket depends largely on the type of equipment and tools used to make the sprocket. Steel is the most common building material because of its versatility and hardness and its use in a variety of applications. Bronze is another common material used for sprockets, usually in non-magnetic environments.
Another common material used for sprockets is reinforced plastic. While sprockets may look similar to gears, the main difference is their teeth and their ability to interlock with the chain. This allows simple rotational movement of large equipment and machinery.
The number of teeth on the sprocket is measured according to the number specified by the standard. An example is the ISO-DIN standard. A typical sprocket has an odd number of teeth to prevent the teeth from wearing out and causing the chain to slip.
A typical sprocket has rollers on the bottom and teeth on the top. When the chain meshes with the sprockets, the rollers get caught on the teeth. The rollers then pull the strap back, removing the extra force. However, if the bottom half of the chain is slack, the rollers will sit on the teeth and the chain will jump forward one tooth.

Function

Sprocket is an important feature for optimizing the user experience of your website. It works by analyzing user behavior on your website and delivering personalized interactions at the right time. This feature can also help you increase the conversion rate of your website. In this article, we’ll explore how to use Sprocket for conversion optimization.
The easiest way to explain the function of a chainring is to imagine a bicycle. The large sprocket is mounted on the pedal axle of the bike, and it drives the chain, which in turn drives the small sprocket on the rear wheel. The same principle is used for motorcycles and some other motor vehicles.
sprocket

element

Sprocket assemblies are wheel-shaped assemblies that hold gears and other components in place. They allow precise rotation of large gears. They can be made of metal or reinforced plastic. Different designs are available to suit different applications. Here are some examples. Sprockets are used for heavy duty rollers.
The components 12 and 14 slide together in the axial direction relative to the drive shaft 18 . The protrusions 22 on one part fit into complementary shaped grooves on the other part. Usually, the two parts are the same, but they can be different. For example, jigsaw-shaped protrusions may fit into grooves in opposing portions.
Sprocket components are usually made of metal or reinforced plastic. They resemble gears due to their wheel-shaped design and teeth. However, sprockets interact with different types of chains. Most sprocket chain systems operate similarly to bicycle chain assemblies. To ensure proper performance, choose the correct one for your specific application.
Whether you’re buying sprockets for an electric car, bike, or construction project, make sure you choose the right sprocket. Sprockets are versatile. A single sprocket may have one or two teeth, while a triple sprocket may have two or more.
sprocket

Put on

Proper maintenance of your bicycle’s chain and sprockets is critical to the performance and safety of your bicycle. These components wear out over time and should be replaced in the correct order. A well-maintained bike can go from 20,000 to 30,000 miles on one set of components. Mileage depends on the quality of the chain and sprockets and the type of riding style. For your safety and the performance of your bike, it is recommended to replace these components every few thousand miles.
Identifying a worn sprocket is easy; you can easily notice when a sprocket’s teeth are cut off. A badly worn sprocket will be unusable and your chain will end up stuck between the teeth. If the chain is damaged by worn sprockets, you should replace the chain.
When a chain or sprocket needs to be replaced, it is important to ensure that the sprocket is properly lubricated. Oiling will make the chain and sprocket more efficient and reduce the risk of damage. A good rule of thumb is to use anti-rust oil to protect your bike from corrosion.
In order to maintain the sprocket, you should follow the manufacturer’s maintenance instructions. You must replace them in the correct order. The first step is to remove the old sprocket and discard it. Old sprockets cannot be mixed with new sprockets.
It is also important to replace the front and rear sprockets when returning the chain. You should also lubricate the chain to prevent rust. Before lubricating, you can clean the chain with a non-petroleum-based cleaner. Don’t use oil as it doesn’t protect the chain from water and is more viscous.

China Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains CNC Machine Non-Standard Spur Gear Sprocket From China Manufacturer     drive sprocketChina Transmission Belt Gearbox Parts General Duty Conveyor Roller Chains CNC Machine Non-Standard Spur Gear Sprocket From China Manufacturer     drive sprocket
editor by CX2023-03-28

China Hard Teeth Transmission Driven Sprocket Steel Gear Kit Forging Finished Bore Sprockets sprocket dropship

Warranty: 1 Yr
Applicable Industries: Garment Outlets, Building Content Shops, Producing Plant, Machinery Mend Stores, Foods & Beverage Factory, Farms, Cafe, Food Store, Good quality normal quality industrial sprocket ,sprocket with low cost price tag Printing Outlets, Design works , Energy & Mining, Foods & Beverage Shops, Advertising and marketing Company, Other
Customized support: OEM
Material: Metal
Regular: ANSI
Product title: Chain Sprocket
Application: Transmission Parts
Material Choose: C45 1045
Search phrases: Pinion Sprocket
Use: Indurstry
Good quality: Higher-Top quality
Processing: Forging-Machining-Hobbing
Warmth therapy: Difficult Enamel
Surface Treatment method: Blank Oxide
personalized manufactured: Assist customization
Packaging Details: Wooden Situation
Port: ZheJiang or HangZhou

Products Present Product Parameter

Product titleChain Sprocket
ApplicationIndustrial
TypeStandard Chain Wheel
UsageIndurstry
Organization Profile HangZhou Xihu (West Lake) Dis. Equipment Co.,Ltd., proven in 2008, Genuine New Intake Cam Variable Valve Sprocket Assy Timing Camshaft Phaser Gear 13050-75571 For 4Runner Tacoma 2TR 2.7 L specializes in manufacturing and supplying a extensive assortment of large-good quality sprockets, gears, pulleys, and couplings for numerous apps.We’ve exported our products to North The us,South The united states, Europe, Africa, Entire computerized environmentally friendly home metal stud channel roll forming device genuine manufacturing unit price tag Middle East and Asia (Japan, Korea and Southeast Asia), expanding our planet-broad advertising and marketing community. Based on the ideas of increased high quality, greater provider and credibility, HangZhou Xihu (West Lake) Dis. Equipment Co., Ltd. aims to supply best top quality and perfectservice for all the clients.What we provide: 1) Great top quality control2) Very aggressive prices 3) point out-of-art technology products4) Ideal skilled group of life style customer electronics.5) Clean communication6) Effective OEM&ODM support Creation Approach Transportation FAQ A) How could I get a sample?Prior to we gained the first purchase, please manage the sample cost and convey fee. We will return the sample value back again to you within your very first get.B) Sample time?Existing objects: Inside of ten-15 times.C) Whether you could make our brand on your merchandise?Yes. We can print your Brand on equally the items and the deals if you can satisfy our MOQ.D) Whether you could make your items by our color?Yes, Ensure Quality Wholesale 42T Gold Alloy Bike Sprocket For YR-9-44T The color of items can be custom-made if you can fulfill our MOQ.E) How to assure the quality of your goods?1) Rigorous detection for the duration of production.2) Stringent sampling inspection on products ahead of shipment and intact item packaging ensured.

What is a sprocket?

A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.
sprocket

ISO sprocket uniformity

ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.

metal sprocket

Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.
sprocket

plastic sprocket

Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.
sprocket

Aluminum sprocket

Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
China Hard Teeth Transmission Driven Sprocket Steel Gear Kit Forging Finished Bore Sprockets     sprocket dropshipChina Hard Teeth Transmission Driven Sprocket Steel Gear Kit Forging Finished Bore Sprockets     sprocket dropship
editor by czh 2023-02-15

China Honda Nx400 Motorcycle Sprocket Wheel Kit and Chain Transmission Sprocket Gear High Quality for Honda Cg150 Motorcycle Part Repuesto PARA Moto Mtosir sprocket bar

Product Description

Merchandise Title Motorcycle Transmission Kit, Chain & Sprocket Kit
Delivery Time 30-forty five Working Days
Top quality a hundred% Tested
Coloration Silver
MOQ five hundred
Packing MTOSIR Packing / Neutral Packing / Customed Packing
Certification ISO9001
Model MTOSIR, OEM
Substance Metal
Service OEM, Style, buyer brand services presented
Model HONDA NX400
Port of Shipment HangZhou / ZheJiang

FAQ

Q1. What is your phrases of packing?
A: Generally, we pack our items in neutral white boxes and brown cartons or our model”MTOSIR” packing. If you have legally registered patent, we can pack the items in your branded boxes right after receiving your authorization letters.
 
Q2. What is your phrases of payment?
A: T/T 30% as deposit, and 70% just before delivery. We will present you the photos of the products and deals ahead of you spend the balance.
 
Q3. What is your conditions of supply?
A: EXW, FOB, CFR, CIF, DDU.
 
This fall. How about your shipping time?
A: Generally, it will take thirty to sixty days soon after obtaining your advance payment. The particular shipping time is dependent on the products and the quantity of your buy.
 
Q5. Can you make according to the samples?
A: Indeed, we can generate by your samples or technological drawings. We can build the molds and fixtures.
 
Q6. What is your sample coverage?
A: We can source the sample if we have prepared components in stock, but the clients have to pay out the sample price and the courier expense. When buyer location order, we will return the sample expense.
 
Q7: How do you make our business long-term and great connection?
A: We maintain good high quality and aggressive price to guarantee our clients benefit.

To Be Negotiated 500 Sets
(Min. Order)

###

Warranty: 1 Year
Material: Stainless Steel
Certification: ISO9001:2001
Transport Package: Carton
Trademark: MTOSIR
Origin: China

###

Samples:
US$ 10/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Product Name Motorcycle Transmission Kit, Chain & Sprocket Kit
Delivery Time 30-45 Working Days
Quality 100% Tested
Color Silver
MOQ 500
Packing MTOSIR Packing / Neutral Packing / Customed Packing
Certification ISO9001
Brand MTOSIR, OEM
Material Metal
Service OEM, Design, buyer logo service offered
Model HONDA NX400
Port of Shipment Ningbo / Shanghai
To Be Negotiated 500 Sets
(Min. Order)

###

Warranty: 1 Year
Material: Stainless Steel
Certification: ISO9001:2001
Transport Package: Carton
Trademark: MTOSIR
Origin: China

###

Samples:
US$ 10/Set
1 Set(Min.Order)

|
Request Sample

###

Customization:

###

Product Name Motorcycle Transmission Kit, Chain & Sprocket Kit
Delivery Time 30-45 Working Days
Quality 100% Tested
Color Silver
MOQ 500
Packing MTOSIR Packing / Neutral Packing / Customed Packing
Certification ISO9001
Brand MTOSIR, OEM
Material Metal
Service OEM, Design, buyer logo service offered
Model HONDA NX400
Port of Shipment Ningbo / Shanghai

How to choose a sprocket in CZPT

Sprocket is one of CZPT mechanical villagers. It can be found at levels 50, 55, 60 and 65. Like other mechanical villagers, it has a metallic texture and occasionally makes mechanical sounds when moving. It prefers green/orange and active/simple style colors.
sprocket

Pitch sprocket

When choosing a pitch sprocket, you need to consider several factors, including the pitch diameter. This affects the torque applied to the shaft and the length of the moment arm. Additionally, incorrect pitch can affect belt life and wear. The pitch diameter should be measured by wrapping the belt around the sprocket at a 180-degree angle to the rod head. You can also consult engineering guidelines and product sheets to determine proper spacing.
The pitch diameter of a sprocket is the distance from the center of the pin to the next pin in the chain. The pitch diameter also determines the size of the sprocket teeth. The larger the pitch, the larger the teeth on the sprocket.
The diameter of the pitch sprocket depends on the type of bike. If you have an older bike, you should choose a sprocket with a diameter closer to the hub. If your bike has a smaller diameter rim, you can choose a sprocket with a smaller diameter and larger caliper. In addition to the caliper diameter, you should also consider the hub diameter.
Proper pitch sprockets can last longer. They are made with hardened teeth to increase their longevity and durability. You can choose between single-purpose and dual-purpose sprockets. Single-tooth sprockets have one tooth per pitch, while double-tooth sprockets have two teeth per pitch.
A pitch sprocket is a component of a bicycle chain. It prevents the chain from shaking due to uneven load distribution. Plus, it helps the chain stay tight.

three sprockets

Triple sprockets are toothed or cogwheels that move the chain. The pitch circle diameter of the triple sprocket is two and a half inches. Most rear sprockets are made of aluminum. The quality of the aluminum sheet used to make the sprocket varies from manufacturer to manufacturer. However, CZPT only uses the best aluminium sheets on the market. The sprockets are then shaped on a hobbing machine to ensure a perfect fit with the chain. The final anodizing process improves durability and adds personalization. The manufacturing process of CZPT is a quality control process with an uncompromising commitment to perfection.
sprocket

Cone lock sprocket

Taper lock sprockets are one of several types of sprockets. It has openings in flanges and tapers, making it ideal for a variety of applications. These sprockets also have the advantage of being easy to install and remove. These sprockets are also available in pre-drilled models that are pre-drilled to fit the shaft diameter. This allows for easier installation and improved alignment. Also, you can replace the sprockets without replacing the entire gear train.
These sprockets have flame hardened teeth for extended chain and sprocket life. They also help reduce drive noise. They are available in a variety of sizes, including duplex and triplex. In addition to being made of high-quality steel, they are also available in cast iron and metric models.

Quick release sprocket

There are several different styles of quick disconnect sprockets. Typically, they come with a 2″ hole and are compatible with various welds on the hub. The Quick Disconnect (QD) style is a special style with a split design on the hub and use of torque bolts to make it easier to install. This type of sprocket is very popular in the power transmission industry.
sprocket

Irregular sprocket

Idler gears are small gears that run on the chain. This sprocket can be used for a variety of purposes and is available in a variety of configurations. Its most common configuration is a ball bearing, pre-lubricated and sealed against moisture. Other idler sprockets have needle bearings, which are more stable and can handle higher capacities. Bronze bearings are another option as they have no moving parts.
China Honda Nx400 Motorcycle Sprocket Wheel Kit and Chain Transmission Sprocket Gear High Quality for Honda Cg150 Motorcycle Part Repuesto PARA Moto Mtosir     sprocket barChina Honda Nx400 Motorcycle Sprocket Wheel Kit and Chain Transmission Sprocket Gear High Quality for Honda Cg150 Motorcycle Part Repuesto PARA Moto Mtosir     sprocket bar
editor by czh 2022-12-20

China High Precision OEM Customized Transmission Gear Sprocket for Various Machinery drive sprocket

Merchandise Description

Merchandise Description
 
Customized Steel Sprocket 

1. Description
 

Specification Personalized
Variety   Sprocket
Material  forty five&num,C8620,SUS304,20CrMnTi and so on.
Treatment Warmth therapies, Carburizing, Sprucing
Common ISO six
Shipping and delivery Date fifteen-20 times for samples&lpar1-20pcs), twenty five-30 days for production&lpar1
Fax -757- 85685979

seven. FAQ

Q&A:

Q 1. Are you the company or trading firm&quest
A We are a specialist producer of equipment transmission, committing to offer customers with good quality, flexible, professional personalized services.
Q 2. What is your major industry&quest
A Our major market place Europe &lparItaly, Germany, and France), Canada, United states of america, and so on.
Q three. How to get a quotation&quest
A Make sure you ship us drawings in igs, dwg, action etc. with each other with comprehensive PDF.
If you have any specifications, remember to note, and we could supply specialist suggestions for your reference.
Q four. What if we do not have drawing&quest
A Samples would be accessible, and we would send out you drawing to verify.
Of course, we would make certain the security of the drawing.
Q 5. How to spend&quest
A For most of the order, T&solT is desired.
Q 6. How to ship&quest
A For modest quantity, we have cooperation with TNT, FEDEX, UPS, and DHL and so forth.
For huge quantity, air or sea would be accessible for you to decide on.
Q 7. What about the packing information&quest
A We hooked up our regular packing details.
If you have any particular demands, we would be ready to assist.
Q eight. What about the delivery time&quest
A It would be 30-forty five days normally for the components to be completely ready and we experienced a system to ensure the time.
When you created your get, you would know.

US $1-40
/ Piece
|
10 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Cast Steel

###

Customization:

###

Specification Customized
Type   Sprocket
Material  45#,C8620,SUS304,20CrMnTi etc.
Treatment Heat treatments, Carburizing, Polishing
Standard ISO 6
Delivery Date 15-20 days for samples(1-20pcs), 25-30 days for production(100-500pcs)

###

Material Carbon Steel SAE1020, SAE1045, Cr12, 40Cr, Y15Pb, 1214L.
Alloy Steel 20CrMnTi, 16MnCr5, 20CrMnMo, 41CrMo, 17CrNiMo5...
Brass/Bronze   HPb59-1, H70, CuZn39Pb2, CuZn40Pb2,C38000, CuZn40
Machining process Gear Hobbing, Gear Milling,  Gear Shaping,  Gear Broaching,  Gear Shaving, Gear Grinding and Gear Lapping
Module 1.0, 1.25, 1.5, 1.75, 2.0, 2.25, 2.5....8.0
Tolerance control Outer Diameter: ±0.005 mm Length Dimension:±0.05 mm
Teeth accuracy DIN Class 4, ISO/GB Class 4, AGMA Class 13, JIS Class 0
Heat treatment Quenching & Tempering, Carburizing & Quenching, High-frequency Hardening, Carbonitriding...
Surface treatment Blacking, Polishing, Anodization, Chrome plating, Zinc plating, Nickel plating...

###

Samples:
Samples quantity 1-10pcs
Samples delivery date 15-20 days
Mass Orders:
100pcs -500pcs 15-20 days
500pcs-1000pcs 30 days
5Kpcs 45 days
Packaging:
Inner packing Blister box
Outer Packing Standard cartons

###

Company FOSHAN CHENGZHI GEAR WORKS CO., LTD.
Contact Coco XU
Tel 0086-757- 85685041
Fax 0086-757- 85685979

###

Q 1. Are you the manufacturer or trading company?
A We are a professional manufacturer of gear transmission, committing to provide customers with quality, flexible, professional custom services.
Q 2. What is your main market?
A Our main market Europe (Italy, Germany, and France), Canada, USA, etc.
Q 3. How to get a quotation?
A Please send us drawings in igs, dwg, step etc. together with detailed PDF.
If you have any requirements, please note, and we could provide professional advice for your reference.
Q 4. What if we do not have drawing?
A Samples would be available, and we would send you drawing to confirm.
Of course, we would ensure the safety of the drawing.
Q 5. How to pay?
A For most of the order, T/T is preferred.
Q 6. How to ship?
A For small quantity, we have cooperation with TNT, FEDEX, UPS, and DHL etc.
For big quantity, air or sea would be available for you to choose.
Q 7. What about the packing details?
A We attached our normal packing details.
If you have any special requirements, we would be willing to help.
Q 8. What about the delivery time?
A It would be 30-45 days normally for the parts to be ready and we had a system to ensure the time.
When you made your order, you would know.
US $1-40
/ Piece
|
10 Pieces

(Min. Order)

###

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Hardness: Hardened Tooth Surface
Gear Position: External Gear
Manufacturing Method: Rolling Gear
Toothed Portion Shape: Spur Gear
Material: Cast Steel

###

Customization:

###

Specification Customized
Type   Sprocket
Material  45#,C8620,SUS304,20CrMnTi etc.
Treatment Heat treatments, Carburizing, Polishing
Standard ISO 6
Delivery Date 15-20 days for samples(1-20pcs), 25-30 days for production(100-500pcs)

###

Material Carbon Steel SAE1020, SAE1045, Cr12, 40Cr, Y15Pb, 1214L.
Alloy Steel 20CrMnTi, 16MnCr5, 20CrMnMo, 41CrMo, 17CrNiMo5...
Brass/Bronze   HPb59-1, H70, CuZn39Pb2, CuZn40Pb2,C38000, CuZn40
Machining process Gear Hobbing, Gear Milling,  Gear Shaping,  Gear Broaching,  Gear Shaving, Gear Grinding and Gear Lapping
Module 1.0, 1.25, 1.5, 1.75, 2.0, 2.25, 2.5....8.0
Tolerance control Outer Diameter: ±0.005 mm Length Dimension:±0.05 mm
Teeth accuracy DIN Class 4, ISO/GB Class 4, AGMA Class 13, JIS Class 0
Heat treatment Quenching & Tempering, Carburizing & Quenching, High-frequency Hardening, Carbonitriding...
Surface treatment Blacking, Polishing, Anodization, Chrome plating, Zinc plating, Nickel plating...

###

Samples:
Samples quantity 1-10pcs
Samples delivery date 15-20 days
Mass Orders:
100pcs -500pcs 15-20 days
500pcs-1000pcs 30 days
5Kpcs 45 days
Packaging:
Inner packing Blister box
Outer Packing Standard cartons

###

Company FOSHAN CHENGZHI GEAR WORKS CO., LTD.
Contact Coco XU
Tel 0086-757- 85685041
Fax 0086-757- 85685979

###

Q 1. Are you the manufacturer or trading company?
A We are a professional manufacturer of gear transmission, committing to provide customers with quality, flexible, professional custom services.
Q 2. What is your main market?
A Our main market Europe (Italy, Germany, and France), Canada, USA, etc.
Q 3. How to get a quotation?
A Please send us drawings in igs, dwg, step etc. together with detailed PDF.
If you have any requirements, please note, and we could provide professional advice for your reference.
Q 4. What if we do not have drawing?
A Samples would be available, and we would send you drawing to confirm.
Of course, we would ensure the safety of the drawing.
Q 5. How to pay?
A For most of the order, T/T is preferred.
Q 6. How to ship?
A For small quantity, we have cooperation with TNT, FEDEX, UPS, and DHL etc.
For big quantity, air or sea would be available for you to choose.
Q 7. What about the packing details?
A We attached our normal packing details.
If you have any special requirements, we would be willing to help.
Q 8. What about the delivery time?
A It would be 30-45 days normally for the parts to be ready and we had a system to ensure the time.
When you made your order, you would know.

What you need to know about sprockets

If you are interested in bicycles or mechanical parts, you may be interested in learning more about Sprockets. There are several types to choose from, each with their own advantages and disadvantages. Here are some details about the different types. Among other things, you may want to consider their spacing, holes and teeth.
sprocket

Various types of sprockets

There are several types of sprockets, each with their own advantages and disadvantages. Generally, sprockets are selected based on their pitch, which is the distance from the center of the needle roller to the sprocket teeth. These two factors are often used together to determine the speed ratio. For example, a 50-tooth drive sprocket produces a 2:1 reduction ratio.
A sprocket is a wheel that meshes with a chain or track to drive the machine. They are different from gears and are usually designed for a specific chain. Choosing the correct type of sprocket will ensure proper performance and minimize maintenance. The accompanying catalog provides specifications for each sprocket.
Sprockets come in many different designs. These include common bores and roller chains. They also have taper and split taper designs. They can also be made to order. Additionally, these sprockets are available with different mounting options. If you’re looking for a chain, you’ll also need to consider size and spacing.
Sprockets are often used in power transmission systems. They are used with roller chains and silent chains. They reduce speed in a similar way to gears. However, sprockets are designed with high friction surfaces that will wear out quickly unless lubricated. This is why sprockets are usually made of steel, although they can also be made of plastic.
The most common type of sprocket is the roller sprocket. This type of sprocket is commonly used in drivetrains because it runs on a series of pins and rollers that create play between the teeth of the sprocket. They have high tensile strength and are usually made of cast iron or graded stainless steel.
Another type of sprocket is the engineered sprocket, which is stronger and more durable than power transmission sprockets. They are also designed to replace worn teeth without removing the conveyor chain. So if you’re planning to buy a new sprocket, read the manual carefully and make sure you choose the one that best meets your needs.
Different types of sprockets have different pitches and sprocket lengths. For example, chains with large pitch diameters require sprockets with large teeth. Conversely, a chain with a shorter pitch will require smaller sprockets and smaller teeth. Likewise, the pitch of the sprocket and its bore also affects the size of the drive shaft. Knowing the diameter of the drive shaft before buying will ensure you choose the correct sprocket for the job at hand.
sprocket

teeth

There are many factors that determine the length and shape of a sprocket. The number of teeth on the sprocket is a consideration. The higher the number of teeth, the longer the life of the sprocket. Also, the higher the number, the better the wear resistance of the sprocket. Most sprockets have 17 teeth, but they can have more or less. Choosing the correct number of teeth for a sprocket will greatly increase the life of the sprocket and chain. The teeth are usually made of the same material as the sprockets, but there are some removable options as well. Another option is to harden the teeth of the sprocket, which will greatly increase the life of the sprocket. This process is often called induction hardening
While sprockets are sometimes made of metal, some are made of plastic or reinforced plastic. The design of the sprocket is similar to the design of the gear, but it is completely different. While they both have a wheel-like shape, the only difference between them is how they interact with different types of chains. In most cases, the sprocket and chain work together, similar to a bicycle chain assembly.
To determine the correct sprocket size, you need to know the size of the drive shaft, which will determine the size of the teeth. For example, a chain with a 3.5 pitch diameter needs a chainring with large teeth, while a chainring with a smaller pitch needs a chainring with small teeth. Pitch diameter or teeth per inch and bore (the hole through which the center of the sprocket passes through the drive shaft) are the two most important factors in determining sprocket size.

Hole

Each spring has two diameters – the shaft diameter and the spring bore. These measurements are important for spring assemblies and cavities. They usually hold a certain tolerance, depending on the customer’s tolerance requirements. Spring manufacturers typically design clearances according to standard manufacturing practices and recommend keeping bore and shaft diameters within a certain tolerance type.
sprocket

asphalt

Pitch is a property of a peak frequency that reflects its relative position in frequency space. The spacing of spikes can be measured using a method called neural coding. During this process, CF builds and indexes a series of single-fiber models. Each model predicts the rate response of the AN to any stimulus. These models have no free parameters and are used to find the excitation parameters that produce the most similar measurement curves.
In the past, baseball pitchers used spiked curves to throw harder knives. This type of curveball is similar to a fastball, but with a sharper hit. The resulting speed allows pitchers to throw harder knives. While it’s not a traditional curveball, it can help pitchers improve their QOP score by reducing the time it takes to complete a pitch.
In addition to estimating the pitch, these studies show that the phase relationship between the three harmonics has little effect on the pitch estimation for the pooled interval distribution. This finding is consistent with psychophysical observations of pitch-phase invariance. However, the phase relationship between unresolved and resolved harmonics may have a greater effect on pitch saliency.

China High Precision OEM Customized Transmission Gear Sprocket for Various Machinery     drive sprocketChina High Precision OEM Customized Transmission Gear Sprocket for Various Machinery     drive sprocket
editor by czh 2022-12-18

in Guatemala City Guatemala sales price shop near me near me shop factory supplier 6 Inch V Belt Pulley Wheel Lock Bushes Metal Bore Sprocket Gear Transmission Machine Parts Manufacture Best Sale Durable European Standard Durable Pulleys manufacturer best Cost Custom Cheap wholesaler

  in Guatemala City Guatemala  sales   price   shop   near me   near me shop   factory   supplier 6 Inch V Belt Pulley Wheel Lock Bushes Metal Bore Sprocket Gear Transmission Machine Parts Manufacture Best Sale Durable European Standard Durable Pulleys manufacturer   best   Cost   Custom   Cheap   wholesaler

In 2000, EPG took the guide in gaining ISO14001 setting management certificate and thereafter handed the inspection of clean generation and recycling economic system, winning the title of “Zhejiang Environmentally friendly Enterprise”. EPG has been efficiently accredited by ISO9002 High quality Administration System, ISO9001 Quality Management Technique, API certificate, ISO/TS16949:2002 and ISO10012 measurement administration technique. “We are constantly serving our buyers with our ideal products.”

6 Inch V Belt EPT Wheel Lock Bushes EPT Bore EPT EPT EPTT EPTT Elements Manufacture EPTT Sale EPTTble European StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd EPTTble EPTs

6 inch v belt pulley

From hefty-responsibility sheaves created to haul your large hundreds to mild-obligation sheaves created for your vehicle’s EPT system, and multi-obligation sheaves for every single application in among, EPT patterns a wide variety of functional, higher efficiency sheaves to preserve your belt EPT system running clean. Every sheave is precision produced to make sure the best fit, and can be fully EPT to your belt method with EPT Produced-To-OrEPTTmetals.

  in Guatemala City Guatemala  sales   price   shop   near me   near me shop   factory   supplier 6 Inch V Belt Pulley Wheel Lock Bushes Metal Bore Sprocket Gear Transmission Machine Parts Manufacture Best Sale Durable European Standard Durable Pulleys manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Guatemala City Guatemala  sales   price   shop   near me   near me shop   factory   supplier 6 Inch V Belt Pulley Wheel Lock Bushes Metal Bore Sprocket Gear Transmission Machine Parts Manufacture Best Sale Durable European Standard Durable Pulleys manufacturer   best   Cost   Custom   Cheap   wholesaler

in Joinville Brazil sales price shop near me near me shop factory supplier 6 Inch V Belt Pulley Wheel Lock Bushes Metal Bore Sprocket Gear Transmission Machine Parts Manufacture Best Sale Durable European Standard Durable Pulleys manufacturer best Cost Custom Cheap wholesaler

  in Joinville Brazil  sales   price   shop   near me   near me shop   factory   supplier 6 Inch V Belt Pulley Wheel Lock Bushes Metal Bore Sprocket Gear Transmission Machine Parts Manufacture Best Sale Durable European Standard Durable Pulleys manufacturer   best   Cost   Custom   Cheap   wholesaler

We also can design and style and make non-standard merchandise to meet customers’ particular demands. Due to our broad product selection and wealthy experiences in this business, With in depth requirments, we can also develop your specific developed product.

six Inch V Belt EPT Wheel Lock Bushes EPT Bore EPT EPT EPTT EPTT Components Manufacture EPTT Sale EPTTble European StXiHu (West EPT) Dis.Hu (West EPT) Dis.rd EPTTble EPTs

six inch v belt pulley

From weighty-duty sheaves created to haul your large hundreds to light-weight-responsibility sheaves designed for your vehicle’s EPT system, and multi-duty sheaves for every software in amongst, EPT designs a extensive range of functional, higher efficiency sheaves to preserve your belt EPT program running sleek. Each sheave is precision produced to ensure the best fit, and can be fully EPT to your belt system with EPT Manufactured-To-OrEPTTmetals.

  in Joinville Brazil  sales   price   shop   near me   near me shop   factory   supplier 6 Inch V Belt Pulley Wheel Lock Bushes Metal Bore Sprocket Gear Transmission Machine Parts Manufacture Best Sale Durable European Standard Durable Pulleys manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Joinville Brazil  sales   price   shop   near me   near me shop   factory   supplier 6 Inch V Belt Pulley Wheel Lock Bushes Metal Bore Sprocket Gear Transmission Machine Parts Manufacture Best Sale Durable European Standard Durable Pulleys manufacturer   best   Cost   Custom   Cheap   wholesaler

in Shizuoka Japan sales price shop near me near me shop factory supplier Wpa Worm Gear Reducer Small Gearbox Large Turbine Transmission Vertical Wpo Stirring Horizontal Transmission Parts manufacturer best Cost Custom Cheap wholesaler

  in Shizuoka Japan  sales   price   shop   near me   near me shop   factory   supplier Wpa Worm Gear Reducer Small Gearbox Large Turbine Transmission Vertical Wpo Stirring Horizontal Transmission Parts manufacturer   best   Cost   Custom   Cheap   wholesaler

“We are constantly serving our clients with our greatest items.” We are looking forward to establishing effective enterprise associations with new clientele about the planet in the foreseeable future. Keeping in brain that good support is the key to cooperating with clientele, we strive to satisfy substantial quality standards, offer aggressive prices and ensure prompt shipping and delivery.

Solution Introduce:

WP Collection WORM Equipment Speed EPT

WP series EPT, worm is produced of 45 # higher quality metal by heat remedy, and worm wheel is solid with tin bronze. It has very good wear resistance, eEPTly in bearing capability. It is mainly appropriate for deceleration EPT of different mechanical products this sort of as plastics, metallurgy, EPTrage, EPT, lifting and transportation, chemical construction and so on.

Product Information:

wp series structure drawing:

Pace Ratio 1/10 1/15 one/twenty one/25 1/thirty one/forty one/50 1/sixty
Performance 77~90% seventy six~88% 75~84% seventy two~82% 68~eighty two% 64~seventy five% sixty two~72% sixty~71%

WP Collection WORM Gear Speed EPT Functions:

one.Drive effortlessly, vibration, impact and sounds are small, deceleration ratio is large, versaEPTty is extensive, and can be used with a variety of mechanical products.

two.Huge EPT ratio can be attained by one-phase EPT, and the structure is compact. Most kinds of EPTs have much better self-locking efficiency. Braking products can be saved for mechanical equipment with braking needs.

three.The meshing friction loss between worm tooth and worm EPT tooth area is greater, so the EPT performance is reduce than that of EPT, easy to warmth and large temperature.

four.Higher specifications for lubrication and cooling.

five.Great compatibility, worm EPT and worm are manufactured according to nationwide stXiHu (West Lake) Dis.Hu (West Lake) Dis.rds, bearing, oil seal and other stXiHu (West Lake) Dis.Hu (West Lake) Dis.rd components are utilised.

Product marketing and advertising:
NMRV worm EPT AC motor X/B series cycloid planetary EPT

product link:
https://EPTngsuEPT.en.manufactured-in-china.com/product/KCnmZXOyeokF/EPT-Nmrv50-90-Degree-EPT-EPT-Velocity-EPT-Rates-Worm-Gear-Box-EPT.html
merchandise website link:
https://EPTngsuEPT.en.created-in-china.com/solution/YNgESCvyGOhb/EPT-High-EPT-3-Section-Synchronous-EPT-1-1kw-1-5HP-AC-EPT-Y2-Sequence-3-Section-Asynchronous-Electric-EPT.html
item hyperlink:
https://EPTngsuEPT.en.produced-in-china.com/item/NyfJTsAonMWb/EPT-Xwd5-Cycloidal-EPT-Planetary-EPT-with-EPT.html

Our Organization:

EPTngsu EPT Equipment EPT Co., Ltd.

Our firm was established in 2018. It was started by a group of young folks with EPTrprising spirit. It is deterEPTd to make a very good EPT box in 100 many years. The firm is fifty-one hundred individuals, with professional R ampampD, design, sales crew, items promote well at house and overseas, the industry is mainly concentrated overEPT. Supply clients with individualized remedies. On the basis of reciprocity and mutual gain, EPT insists on meeting customers’needs with higher top quality and effective services.

We have skilled engineers who can give you with individualized solutions to satisfy distinct wants. EPT can fulfill the requirements of several software locations. Silk and EPTium goods can satisfy the requirements of numerous software fields. They have been productively applied in meat, seafood and aquatic items processing business, baking market, cHangEPT business, EPTrage and dairy merchandise processing market, fruit and vegetable processing industry, pharmaceutical and cosmetics industry and battery production, corrugated paper manufacturing, tire production and other manufacturing fields.

EPT and EPT:
*EPT: In orEPTto ensure the integrity of solution physical appearance, we will decide on cartons, picket pallets and wooden pallets according to client needs.

*Supply time: Each and every EPT is made and tested in accordance with rigorous and fastened techniques to guarantee that the good quality is proper ahead of leaving the manufacturing facility and shipping and delivery on time.

*Transportation method: We will decide on the most suitable method of transportation for our clients in accordance to the weigEPT and size of the merchandise. We can also pick the manner of transportation in accordance to the requirements of our buyers.

*Receiving and right after-sales support: Following obtaining the items, make sure you examine no matter whether they are in good problem. We will supply customers with excellent after-revenue service.

FAQ:
Q1: Are you a trading business or a maker ?
A: We are a company in EPTngsu Province, EPT. Our organization owns the capacity of production, processing, developing and R ampD. We welcome your go to.

Q2: How we decide on versions and specifications?
A: In accordance to the specific specifics of the requires from the portion of enquiry, we will suggest the products’ models on synthesizing the factors of discipline of merchandise utilization, EPT, torque arm and ratio…

Q3: How is your value? Can you provide any low cost?
A: Our rates are alwaEPTcompetitive. If the buyer can area a large order, we definitely will allow price cut.

This autumn: How EPT should I hold out for the comments soon after I send out the enquiry?
A4: We will reply as shortly as attainable, twelve hours at most.

Q5: What is your solution warranty time period?
A: We have the certifications of ISO9001,CE, SGS.

Q6: What EPT are your EPTes being employed?
A: Our EPTes are commonly used to metallurgical gear, mining equipment, EPT tools, food EPTry, EPT gear, tobacco gear and so on.

We hope to hear from you. We will sincerely and warmly serve you and recommend our ideal items to you, if you any intersted in our products,please speak to us:

  in Shizuoka Japan  sales   price   shop   near me   near me shop   factory   supplier Wpa Worm Gear Reducer Small Gearbox Large Turbine Transmission Vertical Wpo Stirring Horizontal Transmission Parts manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Shizuoka Japan  sales   price   shop   near me   near me shop   factory   supplier Wpa Worm Gear Reducer Small Gearbox Large Turbine Transmission Vertical Wpo Stirring Horizontal Transmission Parts manufacturer   best   Cost   Custom   Cheap   wholesaler

in Saltillo Mexico sales price shop near me near me shop factory supplier Bx Cycloidal Drive Transmission Gear Reducer Speed Gearbox manufacturer best Cost Custom Cheap wholesaler

  in Saltillo Mexico  sales   price   shop   near me   near me shop   factory   supplier Bx Cycloidal Drive Transmission Gear Reducer Speed Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

PersonnelOur income individuals are effectively educated to accommodate your requests and talk English for your usefulness. With EPG brand name registered in more than 70 countries like America , Europe , Japan and so on, it has associates among globe leading enterprises, this kind of as JOHNDEERE, NEW HOLLAND, CLAAS, HONDA, KUBOTA, YANMAR, and so forth. our products are promoting effectively in the American, European, South American and Asian markets.


Rated Input EPT of Cycloidal EPT for Single-phase EPT

Stand no. EPT Ratio
eleven 17 23 29 35 forty three fifty nine 71 87
X2
B0
.75
.55
.55 .37
.twenty five
X3
B1
2.two
one.five
1.five
one.1
1.1
.75
.fifty five
X4
B2
4
three
2.2
1.5
1.five
1.1
one.1
.seventy five
.75
X5
B3
seven.five
five.5
5.five
four
4
three
3
2.two
2.2
1.5
one.five
X6
B4
11
7.5
7.five
5.five
five.5
4
4
3
3
two.two
two.2
X7 fifteen
eleven
11
7.five
7.5
five.5
5.five
four
four
X8
B5
18.five
15
15
11
eleven
seven.5
7.5
5.5
5.5
X9
B6
22
18.5
eighteen.five
15
15
eleven
eleven

Feature:

Higher pace ratio and large effectiveness of solitary stage EPT, can achieve one:87 reduction ratio, the performance of a lot more than ninety%, if the use of multi-phase EPT, reduction ratio is more substantial.
Compact structure and little volume thanks to the adoption of planetary EPT basic principle, the enter shaft output shaft in the very same aXiHu (West Lake) Dis.s line, so that its product to acquire the smallest possible dimension.
Clean running sounds reduced cycloidal needle tooth meshing tooth variety, overlap coefficient is big and has the mechanism of parts equilibrium, vibration and sounds limit in the bare minimum diploma.
The use of reliable, EPT lifestyle because the main components of the higher carbon chromium metal substance, right after quenching treatment (HRC58 ~ sixty two) to acquire high energy, and, element of the EPT get in touch with utilizing rolling friction, so EPT existence.

Software area

Cycloid EPT EPT employs cycloid tooth meshing, planetary EPT basic principle, so it is normally known as planetary cycloid EPT.
Planetary cycloid pin-wheel EPT can be broadly utilized in petroleum, environmental safety, chemical industry, cement, transportation, textile, pharmaceutical, meals, printing, lifting, mining, metallurgy, construction, EPT generation and other EPT, as a driving or decelerating device, the EPT is divided into horizontal, vertical, biaXiHu (West Lake) Dis.al and direct assembly manner.
Its EPT sleek construction in many circumstances can change the common cylindrical EPT EPT and worm EPT EPT, therefore, planetary cycloid EPT EPT is commonly used in a variety of EPT and fields, by the greater part of customers are EPTly welcomed.

Characteristics of transportation and EPT

Limited shipping and delivery period,to ensure well timed supply.
TigEPT EPT,to guarantee the products are not destroyed throughout transportation.
Different modes of transportation,to ensure protected and well timed transportation
Follow up the EPT approach of get,to guarantee product supply to consumers.
EPT shelf existence, to guarantee customer experience.

FAQ

Q1: Are you a buying and selling firm or a company ?
A: We are a manufacturer in EPTngsu Province, EPT. Our business owns the capability of manufacturing, processing, designing and R ampD. We welcome your check out.

Q2: How we select models and specifications?
A: In accordance to the specific information of the demands from the element of enquiry, we will recommend the products’ types upon synthesizing the elements of discipline of merchandise usage, EPT, torque arm and ratio…

Q3: How is your price tag? Can you provide any price cut?
A: Our rates are alwaEPTcompetitive. If the client can spot a huge get, we absolutely will enable low cost.

This fall: How EPT ought to I hold out for the suggestions soon after I deliver the enquiry?
A: We will reply the enquiries without having any delay, 12 hrs at most.

Q5: What is your product warranty time period?
A: We have the certifications of ISO99001,CE,

Q6: What EPT are your EPTes currently being utilized?
A: Our EPTes are commonly utilized to metallurgical tools, mining tools, EPT equipment, food EPTry, EPT equipment, tobacco equipment and so on.

  in Saltillo Mexico  sales   price   shop   near me   near me shop   factory   supplier Bx Cycloidal Drive Transmission Gear Reducer Speed Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Saltillo Mexico  sales   price   shop   near me   near me shop   factory   supplier Bx Cycloidal Drive Transmission Gear Reducer Speed Gearbox manufacturer   best   Cost   Custom   Cheap   wholesaler

Machine made in China – replacement parts – in Kikwit Democratic Republic of the Congo Starter Drive Transmission Precision Cylindrical Injection Plastic Spur Gear with ce certificate top quality low price

Machine  made in China - replacement parts -  in Kikwit Democratic Republic of the Congo  Starter Drive Transmission Precision Cylindrical Injection Plastic Spur Gear with ce certificate top quality low price

Machine  made in China - replacement parts -  in Kikwit Democratic Republic of the Congo  Starter Drive Transmission Precision Cylindrical Injection Plastic Spur Gear with ce certificate top quality low price

We – EPG Team the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

Equipment Starter Drive Transmission Precision Cylindrical injection plastic Spur Gear

 

Item Customized  machined injection plastic gears
Craft Process Plastic Injection or CNC machining
Plastic
Granules
 UL, Fda, Ro EPT etc.
High quality Handle ISO9001 and ISO14001
Molds Materials S316,H13,718,738,P20,H13,420SS
Mildew Daily life 300,000 shots or 1,000,000 shots or more
Mildew Cavity Single-cavity or two cavities or  Multi-cavity
Content  Nylon, PA66, NYLON with 30% glass fibre, Abdominal muscles, PP,Laptop,PE,POM,PVC,PU,TPR,TPE,TPU,PA,PET,HDPE,PMMA and so forth.
Molds cavity Hardness sixty to 90 H.R.C
Size/Color  Gears and components proportions are according to drawings from client, and hues are personalized
Surface therapy Polished or matte area, painting, texture, vacuum aluminizing and can be stamped with symbol etc.
Size Tolerance ±0.05mm or more specific
Perform Movement chart Step1: Make tooling to start with and normal need 2~~3 months. Step2: Make and affirm samples.
Step3: A single week for mass generation usual.
Samples confirmation and approval Free samples shipped for confirmation and shipping co EPT paid out by consumers
Bundle Inner clear plastic bag/outside carton/wood pallets/ or any EPT particular deal as for each customer’s specifications.
Shipping and delivery Time Complete takes 2~~4weeks typical
Payment Terms PAYPAL, T/T, Western Union
Shipping Usual FEDEX, UPS, DHL, TNT, EMS or base on customer’s need.

 

 

Production:
one. The workers are educated to inspect the gears and notice any defect in manufacturing in time.
2. QC will check out 1pcs every 100pcs in CNC machining, and gears will fulfill all dimension tolerances.
3. Gears will be inspected at every single action, and gears will be inspected ahead of cargo, and all inspection records will be stored in our factory for three many years.
four. Our sales will ship you pictures at each and every gears manufacturing methods, and you will know the detailed generation position, and you can notice any likelihood of mistake, for our revenue, QC and employees are trying to keep shut observe on all production.
five. You will come to feel us doing work very meticulously to guarantee the quality and straightforward to perform with, 
6. we cherish each inquiry, every prospect to make gears and components and cherish every buyer.

 QUALITY Handle Approach:
 
1)       Inspecting the raw materials –IQC)
two)       Examining the detai EPT before the manufacturing line operated
three)       Have complete inspection and routing inspection during mass generation—In method good quality manage (IPQC)
4)       Examining the gears following creation finished—- (FQC)
5)       Examining the gears soon after they are concluded—–Outgoing good quality manage (OQC)

Services:
1. Molds styles as for each customers’ gears drawing
two. Distributing molds drawings to customers to review and verify prior to mo EPT generation.
three. Delivering samples with whole proportions and cosmetic inspection report, substance certification to clients.
4. Offering inspection report of critical dimensions and beauty in batches areas.

Packing and cargo:

1. Gears are effectively and meticulously packed in PP bags in CTNS, strong adequate for specific shipping and delivery, air cargo or sea shipment.
two. Air shipment, sea cargo or shipment by DHL, UPS, FedEx or TNT are availabe.
3. Trade conditions: EXW, FOB HangZhou, or CIF
4. All shippings will be very carefully organized and will achieve your spots fa EPT and securely.

FAQ

Q1: How to guarantee the Good quality of gears and parts?

We are ISO 9001:2008 licensed factory and we have the integrated method for industrial elements high quality management. We have IQC (incoming good quality control), 
IPQCS (in method top quality handle part), FQC (final good quality manage) and OQC (out-going quality control) to management each and every process of industrial elements prodution.

 Q2: What are the Advantage of your gears and components?

Our advantage is the aggressive and reasonable rates, fa EPT shipping and delivery and substantial good quality. Our eployees are dependable-oriented, pleasant-oriented,and dilient-oriented. 
Our industrial parts goods are showcased by rigorous tolerance, easy end and extended-existence efficiency. 

Q3: what are our machining equipments?

Our machining equipments incorporate plasticn injection machinies, CNC milling devices, CNC turning devices, stamping devices, hobbing devices, computerized lathe equipment, tapping machines, grinding machines, chopping devices and so on. 

This fall: What shipping and delivery techniques do you use?

Generally, we will use UPS DHL or FEDEX and sea shipping 

5: What materia EPT can you procedure?

For plastic injection gears and elements, the materia EPT are Nylon, PA66, NYLON with thirty% glass fibre, Stomach muscles, PP,Pc,PE,POM,PVC,PU,TPR,TPE,TPU,PA,PET,HDPE,PMMA etc.
For steel and machining gears and elements, the materia EPT are brass, bronze, copper, stainless steel, steel, aluminum, titanium plastic etc. 

Q6: How extended is the Supply for Your gears and elements? 
Usually , it will consider us fifteen operating times for injection or machining, and we will try out to shorten our direct time.

The use of first products manufacturer’s (OEM) part figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating item use and compatibility. Our company and the listed substitution parts contained herein are not sponsored, authorized, or produced by the OEM.

Machine  made in China - replacement parts -  in Kikwit Democratic Republic of the Congo  Starter Drive Transmission Precision Cylindrical Injection Plastic Spur Gear with ce certificate top quality low price

Machine  made in China - replacement parts -  in Kikwit Democratic Republic of the Congo  Starter Drive Transmission Precision Cylindrical Injection Plastic Spur Gear with ce certificate top quality low price

Machine  made in China - replacement parts -  in Kikwit Democratic Republic of the Congo  Starter Drive Transmission Precision Cylindrical Injection Plastic Spur Gear with ce certificate top quality low price