{"id":859,"date":"2024-04-08T03:35:50","date_gmt":"2024-04-08T03:35:50","guid":{"rendered":"https:\/\/sprockets.top\/china-oem-good-quality-sprocket-wheel-chain-and-transmission-sprocket-for-agricultural-machinery\/"},"modified":"2024-04-08T03:35:50","modified_gmt":"2024-04-08T03:35:50","slug":"china-oem-good-quality-sprocket-wheel-chain-and-transmission-sprocket-for-agricultural-machinery","status":"publish","type":"post","link":"https:\/\/sprockets.top\/de\/anwendung\/china-oem-good-quality-sprocket-wheel-chain-and-transmission-sprocket-for-agricultural-machinery\/","title":{"rendered":"China OEM Good Quality Sprocket Wheel Chain and Transmission Sprocket for Agricultural Machinery"},"content":{"rendered":"
\n
\n

Produktbeschreibung<\/h2>\n

\n

\u00a0\u00a0 <\/p>\n

\n

1.Chain used<\/h3>\n

\n

sprocketes are manufactured with a tooth profile and dimensional precision to bring out the maximum performance of the chain you will use. <\/p>\n

\n

\n

\n

\n

2. Number of teeth<\/h3>\n

\n

sprockets are available with small and large numbers of teeth to match your usage conditions.
\u00a0 <\/p>\n\n\n\n\n
\n

Single pitch sprocket<\/b> <\/p>\n

<\/td>\n

\n

Double pitch sprocket<\/b> <\/p>\n

<\/td>\n<\/tr>\n

\n

*Chain matched:35(06C) \/06BTeeth:from 9-120 <\/p>\n

*Chain matched:40(08A) \/08BTeeth:from 9-120 <\/p>\n

*Chain matched:50(10A) \/10BTeeth:from 9-120 <\/p>\n

*Chain matched:60(12A) \/12BTeeth:from 9-120 <\/p>\n

*Chain matched:80(16A) \/16B Teeth:from 9-120 <\/p>\n

*Chain matched:100(20A)\/20B Teeth:from 9-120 <\/p>\n

*Chain matched:120(24A) \/24B Teeth:from 9-120 <\/p>\n

*Chain matched:140(28A) \/28B Teeth:from 9-120 <\/p>\n

*Chain matched:160(32A) \/32B Teeth:from 9-120 <\/p>\n

*Chain matched:200(40A) \/40B Teeth:from 9-120 <\/p>\n

<\/td>\n

\n

*P=25.4mm Teeth:from 7-100 <\/p>\n

\u00a0 <\/p>\n

*P=31.8mm Teeth:from 7-100 <\/p>\n

\u00a0 <\/p>\n

*P=38.1mm Teeth:from 7-100 <\/p>\n

\u00a0 <\/p>\n

*P=50.8mm Teeth:from 7-100 <\/p>\n

\u00a0 <\/p>\n

*P=63.5mm Teeth:from 7-100 <\/p>\n

<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\n

\n

\n

3. Consturction <\/p>\n

\n

4. Material<\/h3>\n

\n

Carbon Steel, Stainless Steel,Aluminum, Nylon, POM, Copper, Brass,42CrMo,40Cr,A3 and so on. <\/p>\n

\n

\n

\n

\n

5. Bore<\/h3>\n

\n

Pilot bore, finished bore, taper bore, bearing hole and special bore <\/p>\n

\n

\n

\n

\n

6. Treatment<\/h3>\n

\n

Heat Treatment: Hardening and Tempering, High Frequency Quenching, Carburizing Quenching and so on. <\/p>\n

\u00a0 <\/p>\n

Surface Treatment: Zinc Plating, Chrome plated, Black oxide Treatment, Spray Paint, Mirror Finish, Sand-blasting and so on. <\/p>\n

\n

\n

\n

\n

FAQ <\/p>\n

1. Are you manufacturer or trade company ?
\u00a0\u00a0\u00a0\u00a0We are a\u00a0manufacturing factory founded in 1987 ,with trade team for international service.
2. What terms of payment you usually use ?
\u00a0\u00a0\u00a0\u00a0T\/T .\u00a030%\u00a0\u00a0deposit ,and 70% before finish production .Price :FOB ZheJiang .
3. Can you make products according to customer”s design ?
\u00a0\u00a0\u00a0\u00a0Yes ,\u00a0we can make according to customer”s drawing and samples .OED and ODM are acceptable.
4.How long is your delivery time ?
\u00a0\u00a0\u00a0Genarally it is 5-15 days afte rthe deposit .It will take more days customized.
5. What do I\u00a0need for offering a\u00a0quote ?
\u00a0\u00a0\u00a0Please offer us 2D or 3D drawing (with material ,dimension,surface treatment and other technical\u00a0\u00a0datas etc.), quantity ,or samples .
\u00a0\u00a0\u00a0Then we will quote the best price .
\u00a0
\u00a0
\u00a0<\/p>\n

\t\/* 22. Januar 2571 19:08:37 *\/!function(){function s(e,r){var a,o={};try{e&&e.split(\u201c,\u201d).forEach(function(e,t){e&&(a=e.match(\/(.*?):(.*)$\/))&&1\t <\/p>\n

\n

\n

\n<\/div>\n
\n\n\n\n\n
Standard Or Nonstandard:<\/th>\nStandard<\/td>\n<\/tr>\n
Anwendung:<\/th>\nElectric Cars, Motorcycle, Machinery, Agricultural Machinery<\/td>\n<\/tr>\n
Hardness:<\/th>\nHardened Tooth Surface<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n
<\/div>\n\n\n\n
Proben:<\/th>\n\n
\n
\n US$ 0.1\/Piece<\/strong>
\n 1 St\u00fcck (Mindestbestellmenge)<\/span>\n <\/div>\n

|<\/span><\/p>\n

<\/i>Muster bestellen<\/p><\/div>\n

<\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
Anpassung:<\/th>\n\n
\n
\n Verf\u00fcgbar\n <\/div>\n

|<\/span><\/p>\n

<\/i>Kundenspezifische Anfrage<\/p><\/div>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}<\/p>\n

<\/div>\n\n\n\n
\n Versandkosten:<\/p>\n
\n <\/i><\/p>\n
\n
\n

Gesch\u00e4tzte Frachtkosten pro Einheit.<\/p>\n


\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>
\n\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n <\/div>\n<\/p><\/div>\n<\/p><\/div>\n<\/th>\n

\n
\n
\n <\/b>
\n <\/span>
\n \u00fcber Versandkosten und voraussichtliche Lieferzeit.\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n
Zahlungsmethode:\n <\/th>\n\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>
\n <\/p>\n

<\/span>\n <\/td>\n<\/tr>\n

 \n <\/th>\n\n
\n <\/i>
\n Erste Zahlung
\n <\/span>
\n
\n <\/i>
\n Vollst\u00e4ndige Zahlung
\n <\/span>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
W\u00e4hrung:\n <\/th>\n\n US$<\/span>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n
R\u00fcckgabe & Erstattung:\n <\/th>\n\n Sie k\u00f6nnen bis zu 30 Tage nach Erhalt der Produkte eine R\u00fcckerstattung beantragen.\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table><\/div>\n<\/p><\/div>\n<\/table>\n

\"Radritzel\"<\/p>\n

Berechnung der Drehmomentanforderungen f\u00fcr eine Radkettenradbaugruppe<\/h3>\n

Die Berechnung des Drehmomentbedarfs f\u00fcr eine Rad-Kettenrad-Baugruppe erfordert die Ber\u00fccksichtigung verschiedener Faktoren, die zur Drehmomentbelastung beitragen. Der Drehmomentbedarf ist entscheidend f\u00fcr die Auswahl des geeigneten Motors oder der geeigneten Energiequelle f\u00fcr den effektiven Antrieb des Systems. Hier ist eine Schritt-f\u00fcr-Schritt-Anleitung:<\/p>\n

    \n
  1. 1. Bestimmen Sie das Lastmoment:<\/b> Ermitteln Sie das Drehmoment, das erforderlich ist, um den Widerstand oder die Last im System zu \u00fcberwinden. Dies umfasst das Drehmoment, das ben\u00f6tigt wird, um die Last zu bewegen, die Reibung zu \u00fcberwinden und gegebenenfalls die Last zu beschleunigen.<\/li>\n
  2. 2. Den Kettenradradius bestimmen:<\/b> Messen Sie den Radius des Kettenrads (Abstand von der Mitte des Kettenrads bis zum Ber\u00fchrungspunkt mit der Kette oder dem Riemen).<\/li>\n
  3. 3. Berechnen Sie die Spannung in der Kette oder im Riemen:<\/b> Bei Verwendung eines Ketten- oder Riemenantriebs muss die Ketten- bzw. Riemenspannung berechnet werden. Die Spannung beeinflusst das f\u00fcr die Kraft\u00fcbertragung erforderliche Drehmoment.<\/li>\n
  4. 4. Effizienzverluste ber\u00fccksichtigen:<\/b> Ber\u00fccksichtigen Sie den Wirkungsgrad des Systems. Aufgrund von Reibung und anderen Verlusten wird nicht die gesamte Eingangsleistung in Ausgangsleistung umgewandelt. Beziehen Sie diesen Wirkungsgrad in Ihre Berechnungen mit ein.<\/li>\n
  5. 5. Drehmomentgleichung anwenden:<\/b> Das Drehmoment (T) kann mit folgender Gleichung berechnet werden:
    T = (Lastmoment \u00d7 Kettenradradius) \u00f7 (Wirkungsgrad \u00d7 Spannung)<\/code><\/li>\n<\/ol>\n

    Es ist unerl\u00e4sslich, f\u00fcr alle Werte in der Gleichung einheitliche Ma\u00dfeinheiten zu verwenden (z. B. Newtonmeter oder Fu\u00dfpfund).<\/p>\n

    Bedenken Sie, dass die realen Bedingungen variieren k\u00f6nnen, und es ist ratsam, den berechneten Drehmomentanforderungen einen Sicherheitsfaktor hinzuzuf\u00fcgen, um sicherzustellen, dass das System unerwartete Lastspitzen oder Schwankungen der Betriebsbedingungen bew\u00e4ltigen kann.<\/p>\n

    \"Radritzel\"<\/p>\n

    Extending the Lifespan of a wheel sprocket Assembly<\/h3>\n

    To ensure a long lifespan for your wheel sprocket assembly, consider the following maintenance and operational practices:<\/p>\n

      \n
    • Regular Lubrication:<\/b> Apply the appropriate lubricant to the sprocket teeth and chain or belt regularly. Lubrication reduces friction, wear, and the likelihood of premature failure.<\/li>\n
    • Proper Tension:<\/b> Maintain the correct tension in the chain or belt to prevent excessive stress and wear. Follow the manufacturer’s guidelines for tensioning.<\/li>\n
    • Alignment:<\/b> Ensure precise alignment between the wheel sprocket. Misalignment can cause accelerated wear and increase the risk of failure.<\/li>\n
    • Inspections:<\/b> Regularly inspect the wheel, sprocket, chain, or belt for signs of wear, damage, or fatigue. Replace any worn-out or damaged components promptly.<\/li>\n
    • Cleanliness:<\/b> Keep the wheel sprocket assembly clean from dirt, debris, and contaminants that can contribute to wear and corrosion.<\/li>\n
    • Correct Usage:<\/b> Operate the machinery within the recommended speed, load, and temperature limits specified by the manufacturer.<\/li>\n
    • Training and Operator Awareness:<\/b> Ensure that equipment operators are properly trained to use the machinery correctly and are aware of maintenance procedures.<\/li>\n
    • Use Quality Components:<\/b> Invest in high-quality wheels, sprockets, chains, or belts from reputable suppliers to improve durability and reliability.<\/li>\n
    • Replace Components in Sets:<\/b> When replacing parts, consider replacing the entire set (e.g., chain and sprockets) to maintain uniform wear and performance.<\/li>\n
    • Address Vibration Issues:<\/b> Excessive vibration can accelerate wear. Investigate and address any vibration problems promptly.<\/li>\n<\/ul>\n

      By following these practices, you can significantly extend the lifespan of your wheel sprocket assembly, reduce downtime, and enhance the overall efficiency and safety of your machinery.<\/p>\n

      \"Radritzel\"<\/p>\n

      How Does a wheel sprocket Assembly Transmit Power?<\/h3>\n

      In a mechanical system, a wheel sprocket assembly is a common method of power transmission, especially when dealing with rotary motion. The process of power transmission through a wheel sprocket assembly involves the following steps:<\/p>\n

      1. Input Source:<\/strong><\/p>\n

      The power transmission process begins with an input source, such as an electric motor, engine, or human effort. This input source provides the necessary rotational force (torque) to drive the system.<\/p>\n

      2. Wheel Rotation:<\/strong><\/p>\n

      When the input source applies rotational force to the wheel, it starts to rotate around its central axis (axle). The wheel’s design and material properties are essential to withstand the applied load and facilitate smooth rotation.<\/p>\n

      3. Sprocket Engagement:<\/strong><\/p>\n

      Connected to the wheel is a sprocket, which is a toothed wheel designed to mesh with a chain. When the wheel rotates, the sprocket’s teeth engage with the links of the chain, creating a positive drive system.<\/p>\n

      4. Chain Rotation:<\/strong><\/p>\n

      As the sprocket engages with the chain, the rotational force is transferred to the chain. The chain’s links transmit this rotational motion along its length.<\/p>\n

      5. Driven Component:<\/strong><\/p>\n

      The other end of the chain is connected to a driven sprocket, which is attached to the component that needs to be powered or driven. This driven component could be another wheel, a conveyor belt, or any other machine part requiring motion.<\/p>\n

      6. Power Transmission:<\/strong><\/p>\n

      As the chain rotates due to the engagement with the sprocket, the driven sprocket also starts to rotate, transferring the rotational force to the driven component. The driven component now receives the power and motion from the input source via the wheel, sprocket, and chain assembly.<\/p>\n

      7. Output and Operation:<\/strong><\/p>\n

      The driven component performs its intended function based on the received power and motion. For example, in a bicycle, the chain and sprocket assembly transmit power from the rider’s pedaling to the rear wheel, propelling the bicycle forward.<\/p>\n

      Overall, a wheel sprocket assembly is an efficient and reliable method of power transmission, commonly used in various applications, including bicycles, motorcycles, industrial machinery, and conveyor systems.<\/p>\n

      \"China\"China
      editor by CX 2024-04-08<\/p>","protected":false},"excerpt":{"rendered":"

      Product Description \u00a0\u00a0 1.Chain used sprocketes are manufactured with a tooth profile and dimensional precision to bring out the maximum performance of the chain you will use. 2. Number of teeth sprockets are available with small and large numbers of teeth to match your usage conditions. \u00a0 Single pitch sprocket Double pitch sprocket *Chain matched:35(06C) […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[953,2600,2982,1571,77,107,2868,111,561,2315,1569,2407,1575,211,2616,1573,1576,1825,1574,148,259,2316,949,569,570,2551,951],"class_list":["post-859","post","type-post","status-publish","format-standard","hentry","category-uncategorized","tag-agricultural-chain","tag-agricultural-chain-sprocket","tag-agricultural-machinery-chain","tag-agricultural-machinery-china","tag-chain","tag-chain-and-sprocket","tag-chain-for-agricultural-sprocket","tag-chain-sprocket","tag-chain-transmission","tag-chain-wheel-sprocket","tag-china-agricultural-machinery","tag-china-chain","tag-china-machinery","tag-china-sprocket","tag-good-chain","tag-machinery","tag-machinery-china","tag-machinery-for","tag-machinery-machinery","tag-sprocket","tag-sprocket-and-chain","tag-sprocket-chain-wheel","tag-sprocket-wheel","tag-transmission-chain","tag-transmission-sprocket","tag-wheel-and-sprocket","tag-wheel-sprocket"],"_links":{"self":[{"href":"https:\/\/sprockets.top\/de\/wp-json\/wp\/v2\/posts\/859","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sprockets.top\/de\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/sprockets.top\/de\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/sprockets.top\/de\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/sprockets.top\/de\/wp-json\/wp\/v2\/comments?post=859"}],"version-history":[{"count":0,"href":"https:\/\/sprockets.top\/de\/wp-json\/wp\/v2\/posts\/859\/revisions"}],"wp:attachment":[{"href":"https:\/\/sprockets.top\/de\/wp-json\/wp\/v2\/media?parent=859"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/sprockets.top\/de\/wp-json\/wp\/v2\/categories?post=859"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/sprockets.top\/de\/wp-json\/wp\/v2\/tags?post=859"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}