China Sprocket XL185 Rear Sprocket for Motorcycle chain sprocket price

Merchandise Description

Item Description

Motorbike PARTS  Transmission Components Sprocket 

Q+A

1. What’s the thickness of the sprocket?
six.8-7mm

two. What is your area treatment method for the sprocket?
We have copper, candle blue, red, white, blue white, black, silver white toast portray, large frequency.

3. What is actually the hardness after the sprocket make heat remedy?
1571 material hardness is thirty-40HRC, 1045 substance hardness is forty-45HRC

four. How extended is your sprocket perform?
Sprocket 1571 materials with heat therapy can work fifteen, 000km, 1045 content with warmth remedy can perform twenty, 000km

five. What model sprocket can you offer?
We make our very own manufacturer, of system can make OEM manufacturer, with your licensed letter and register brand letter

six. What is your delivery time for sprocket?
Normally thirty times right after acquiring your deposit

Motorbike sprocket, front sprocket, rear sprocket, chain established, sprocket set, motorbike areas, motorcycle sprocket set, motorcycle sprocket wheel, chain sprocket, motorcycle components, bike gear, timing sprocket, front sprocket, motorbike wheel, sprocket package, bike spare areas, sprocket wheel, chain wheel, sprocket, sprocket gear, common sprocket are great high quality and not only standard sprocket, we also create the sprocket as for every your drawing and attain OEM good quality degree.

Merchandise Name Rear Sprocket
Materials C45, A3, 40Cr, 20CrMnTi, 42CrMo, copper, stainless steel and so on as for every your request
Process Solid
Warmth Remedy Large frequency quenching, heat therapy, hardened teeth
Surface area Treatment method Chrome plated, zinc plated, shade portray, or consumer necessity
Functionality Higher precision, large dress in resistance, minimal noise, clean and steady, higher power
Model we can provide
YAMAHA  JOG50, SR50, YB50, YB80, YB100, JY55, CX50, V50, V80, V90, COMET, CPI, T50, NF50, 
NF55, NX50, AXIS90, AXIS100, RS100, DX100, SRZ150, YBR125, Y110,XH100, LC100, 
DX100, YAMAHA 100, YAMAHA250, Etc
  HONDA  GY6,BT50, LEAD50, WS100, WS110, CG125, CG150, WY125, WY150, GL125, CD100,
CD110, JH125, JH90, C70, C75, C100, C110, QJ110, L90, DY100, JL100,QJ100, SY150,
CB150,TITAN00/99,XL125, XL185, NXR125,H100S,And so forth
  SUZUKI  FR50,  FR80, AD50, AD60, AG50, AG60, A100, AX100, K90, FB70, FB100, K100, K125,
MAX100, GP125, GS125 ,And many others
  BAJAJ  BOXER, DISCOVER, PULSAR, PLATINA, And many others

US $0.1-100
/ Piece
|
1,000 Pieces

(Min. Order)

###

Type: Sprocket
Material: Steel
Certification: ISO9001:2001
Number of Row: Single Row
Surface Treatment: Zinc Plated, Chrom Plated, Polishing, Copper Coated
Hardness: 35-50HRC

###

Customization:

###

Product Name Rear Sprocket
Material C45, A3, 40Cr, 20CrMnTi, 42CrMo, copper, stainless steel and so on as per your request
Process Forged
Heat Treatment High frequency quenching, heat treatment, hardened teeth
Surface Treatment Chrome plated, zinc plated, color painting, or customer requirement
Performance High precision, high wear resistance, low noise, smooth and steady, high strength
Model we can provide
YAMAHA  JOG50, SR50, YB50, YB80, YB100, JY55, CX50, V50, V80, V90, COMET, CPI, T50, NF50, 
NF55, NX50, AXIS90, AXIS100, RS100, DX100, SRZ150, YBR125, Y110,XH100, LC100, 
DX100, YAMAHA 100, YAMAHA250, ETC
  HONDA  GY6,BT50, LEAD50, WS100, WS110, CG125, CG150, WY125, WY150, GL125, CD100,
CD110, JH125, JH90, C70, C75, C100, C110, QJ110, L90, DY100, JL100,QJ100, SY150,
CB150,TITAN00/99,XL125, XL185, NXR125,H100S,ETC
  SUZUKI  FR50,  FR80, AD50, AD60, AG50, AG60, A100, AX100, K90, FB70, FB100, K100, K125,
MAX100, GP125, GS125 ,ETC
  BAJAJ  BOXER, DISCOVER, PULSAR, PLATINA, ETC
US $0.1-100
/ Piece
|
1,000 Pieces

(Min. Order)

###

Type: Sprocket
Material: Steel
Certification: ISO9001:2001
Number of Row: Single Row
Surface Treatment: Zinc Plated, Chrom Plated, Polishing, Copper Coated
Hardness: 35-50HRC

###

Customization:

###

Product Name Rear Sprocket
Material C45, A3, 40Cr, 20CrMnTi, 42CrMo, copper, stainless steel and so on as per your request
Process Forged
Heat Treatment High frequency quenching, heat treatment, hardened teeth
Surface Treatment Chrome plated, zinc plated, color painting, or customer requirement
Performance High precision, high wear resistance, low noise, smooth and steady, high strength
Model we can provide
YAMAHA  JOG50, SR50, YB50, YB80, YB100, JY55, CX50, V50, V80, V90, COMET, CPI, T50, NF50, 
NF55, NX50, AXIS90, AXIS100, RS100, DX100, SRZ150, YBR125, Y110,XH100, LC100, 
DX100, YAMAHA 100, YAMAHA250, ETC
  HONDA  GY6,BT50, LEAD50, WS100, WS110, CG125, CG150, WY125, WY150, GL125, CD100,
CD110, JH125, JH90, C70, C75, C100, C110, QJ110, L90, DY100, JL100,QJ100, SY150,
CB150,TITAN00/99,XL125, XL185, NXR125,H100S,ETC
  SUZUKI  FR50,  FR80, AD50, AD60, AG50, AG60, A100, AX100, K90, FB70, FB100, K100, K125,
MAX100, GP125, GS125 ,ETC
  BAJAJ  BOXER, DISCOVER, PULSAR, PLATINA, ETC

What is a sprocket?

A backlash sprocket is a sprocket with multiple teeth. The teeth are arranged at different intervals on the outer circumference of the sprocket. The bottoms of the tooth gaps are arcuate and connect opposing faces of adjacent teeth.
The backlash diameter on the backlash sprocket is larger than the diameter of the ISO tooth profile. This allows the rollers to engage the front surfaces of the teeth without causing the teeth to disengage. The result is reduced shock and noise.
as the picture shows. as the picture shows. As shown in FIG. 2, the sprocket 11 has a front surface (11a) and a rear surface (12b). The teeth are connected by a line extending from the center of rotation O of the sprocket to the center of the tooth gap bottom (13). The tooth surface on the sprocket is a convex arc of equal radius. The radius of re12a and re12b is larger than re8 of ISO tooth profile.
In addition to the tooth pitch of the sprockets, ISO sprockets have standard chains. This chain is defined as ISO 606 1994 (E). The sprocket pitch line is pc. The height of the tooth head (ha) is measured from the tooth pitch polygon.
Typically, the sprocket is secured to the shaft using one or more set screws. This means that it must be able to accommodate the keyway. To determine how much space is left, the outside diameter of the sprocket must be at least 10% larger than the pitch diameter of the shaft.
The gap tooth sprocket system provides extra precision for chain alignment. Its teeth are higher than ISO teeth.
sprocket

ISO sprocket uniformity

ISO sprocket standard 606 specifies sprocket compliance for most of Europe. This standard specifies large spacings, measured in sixteenths of an inch, and expressed in metric units. It was developed before the American chain and was limited by the materials available. To ensure consistency, the ISO outer plate uses a chain size one step larger than the chain size required for the application. This results in a heavier chain. ISO sprockets are available in single, double and triple chain versions.
ANSI and ISO sprockets are interchangeable. They are based on mathematical themes and have a clear design. ISO sprockets are usually smaller than ANSI sprockets. They are also denoted with the suffix “B” to denote their chain number.

metal sprocket

Sintered metal sprocket is a metal sprocket with high mechanical properties. The tensile strength of the sprocket can reach more than 700 MPa, and the Charpy impact strength is 20 J/cm2. It’s also durable and wear-resistant.
This sprocket is used for high load applications. Its teeth are made of metal and flame-hardened. The edges of the teeth are slightly softer than the rest of the teeth. The edges of the sprockets wear out when bitten.
The sprocket is a toothed profiled wheel. It is different from a pulley that meshes with a belt. On the other hand, timing pulleys are used with toothed belts. Sprockets and chain mechanisms were also used in early cars.
Another common use for metal sprockets is in movie projectors, where they punch holes in the film. They are also used as the paper feed mechanism in some computer printers. There are several types of sprockets. Some sprockets are lightweight, while others are heavy and have flanges to keep the timing belt centered.
sprocket

plastic sprocket

Plastic sprockets are ideal for a variety of applications. They reduce noise and reduce chain wear. Their compressibility also increases their overall load capacity. Some of their uses include dust-free environments, food applications and quieter chain drives. They can also be customized to your specifications.
One embodiment of the present invention includes a plastic sprocket having a co-injected outer shell and an inner core of a second material. This allows the sprocket to combine the advantages of both materials. This makes the sprocket easier to clean and lighter in weight.
There are many different materials available for plastic sprockets. One of the most popular is Duro-Glide(r) UHMW-PE. However, there are other materials that are better suited for certain applications. For example, polyurethane sprockets have excellent wear resistance, but may be too flexible to drive a belt. Therefore, it is important to find the right combination of materials to get the job done.
If you are in the market for a plastic sprocket, contact a reputable manufacturer. These companies offer a wide range of standard and custom sizes to meet any of your needs. They can also offer czpt delivery for quick turnaround. They specialize in custom manuManufactured and certified to ISO 9001:2000.
Imao offers sprockets in a variety of different materials. They are available in a variety of sizes and feature either molded ball bearings or fiberglass reinforced bearings. These sprockets are designed for sawmills and other light duty applications. They are also resilient and can be used in any type of sawmill.
sprocket

Aluminum sprocket

Aluminum sprockets save weight and increase the speed of the bike. The material used to make them is 7075-T6 aerospace grade aluminum, which makes them lightweight and durable. The teeth are also formed on the hobbing machine so they fit perfectly and reduce friction. They also have an anodized color finish for added strength and durability.
The size you need depends on your wheel setup and the type of terrain you ride. Larger sprockets are better for slower terrain and provide more torque. However, larger sprockets tend to reduce top speed, so you may need to adjust accordingly. If you have an OEM 19″ or 16″ setup, 52t/54t sprockets are the most recommended option. 7075-T6 aluminum also reduces weight and rolling mass.
China Sprocket XL185 Rear Sprocket for Motorcycle     chain sprocket priceChina Sprocket XL185 Rear Sprocket for Motorcycle     chain sprocket price
editor by czh 2023-01-15